- ×
RFID 13.56Mhz RC-522 Card Keychain Reader1 × ₨550 - ×
W1401 LED Digital Thermostat Temperature Control1 × ₨1,350 - ×
1 Channel Wireless 433Mhz Remote Control Relay Module 220v1 × ₨1,200
Subtotal: ₨3,100
Power
Showing 97–120 of 152 resultsSorted by popularity
- Power
Power Bank Case for 2X 18650
- This is Mobile Power Bank kit
- 18650 battery is not included.
- The battery must be installed in right direction before you can use.
- Installing the battery must pay attention to the positive and negative, anti-loaded will burn, burned out is not returned.
- This is a DIY Kit, Put 2x 18650 Batteries & Enjoy Power Bank.
SKU: n/a - 433 Mhz, Arduino, Arduino Components, Modules, Power, Relays, Wireless
1 Channel Wireless 433Mhz Remote Control Relay Module 220v
433 Mhz, Arduino, Arduino Components, Modules, Power, Relays, Wireless1 Channel Wireless 433Mhz Remote Control Relay Module 220v
- Input Voltage: AC85V-AC220V
- RF Frequency: 315/433MHZ
- RF Working mode:Super heterodyne receiver
- Receiver Sensitivity: -107dBm
- Remote Control Distance: >100 meter(In open environment)
- Remote Control sold seperately
- works with 433 mhz remote control with encoding type ev1527 pt2262 etc
- Decoding Way: MCU Software decoding
- Can store the number of remote control:32
- Support remote control type: Fixed code, learning code
- Channel: 1CH
SKU: n/a - Power, Tools
UNI-T UT201 Digital Clamp Multimeter Ampere Meter
Model: UT201
- AC Current (A): 2A/20A/200A/400A ±(1.5%+5)
- AC Voltage (V): 2V/20V/200V/600V ±(1.2%+5)
- DC Voltage (V): 200mV/2V/20V/200V/600V ±(0.8%+1)
- Resistance (Ω): 200Ω/2KΩ/20KΩ/200KΩ/2MΩ/20MΩ ±(1%+2)
- Temperature (°C): -40°C -1000°C ±(1%+3)
- Temperature (°F): -40°F-1832°F ±(1%+6)General Characteristic:
- Power: 1.5V Batteries(R03) * 2 (not included)
- LCD Size: 35.6mm * 18 mm
- Product Color: Red and Grey
- Product Net Weight: 220g
- Product Size: 210mm * 75.6mm * 30 mm
- Package Size: 24 * 9 * 6cm / 9.4 * 3.6 * 2.4in Package Weight: 384g / 13.6oz
SKU: n/a - Power, Relays
4 Channel 5v Optically Isolated Relay Module
- Operating Voltage: 5v DC
- Relay contact capacity: 250v AC 10A, or 30v DC 10A
- Optically Isolated from Mains
- Relay output: normally open, normally closed
- Low level Trigger
- signal input voltage range: 0 – 5 v
- Compatible with Arduino, PIC, AVR etc
SKU: n/a - Power, Tools
UNI-T UT203 Digital Clamp Multimeter Ampere Meter
Model: UT203
- AC Current (A): 40A/400A ±(2.5%+5)
- DC Current (A): 40A/400A ±(2%+3)
- AC Voltage (V): 4V/40V/400V/600V ±(1%+5)
- DC Voltage (V): 400mV/4V/40V/400V/600V ±(0.8%+1)
- Resistance (Ω): 400Ω/4kΩ/40kΩ/400kΩ/4MΩ/40MΩ ±(1%+2)
- Frequency (Hz): 10Hz~1MHz ±(0.1%+3)
SKU: n/a - Arduino, Arduino Components, Modules, Power, Relays, Sensors
XH-W1219 LED Digital Thermostat Temperature Controller
Arduino, Arduino Components, Modules, Power, Relays, SensorsXH-W1219 LED Digital Thermostat Temperature Controller
- This is Universal Digital Thermostat
- Temperature Control Module can be used to control the temperature of anything (Solid or Liquid or Air)
- Set the Specific Temperature You Want to Maintain.
- Module operates on 12v DC
- You can control DC or AC Appliances
- Recommended for Incubation
SKU: n/a - Arduino, Robotics
Mini Micro 9g 1.6KG Servo SG90
- Model: SG90
- Technical data given by the manufacturers:
- Size: 21.5mmX11.8mmX22.7mm
- Weight: 9 grams
- No-load speed: 0.12 seconds / 60 degrees (4.8V)
- Stall torque of 1.2 – 1.4 kg / cm (4.8V)
- Operating temperature: -30 to +60 degrees Celsius
- Dead-set: 7 microseconds
- Operating voltage: 4.8V-6V
SKU: n/a - Modules, Power, Voltage Converters
DC-DC Step Up Down Boost Buck Voltage Converter Module LM2577S LM2596S
Modules, Power, Voltage ConvertersDC-DC Step Up Down Boost Buck Voltage Converter Module LM2577S LM2596S
- Input Voltage :4-35V
- Output voltage: Continuously adjustable(1.25-25V unload adjust)
- Output current: 3A Max(If more than 15W, please install the heat sink)
- CC range :0-2A (adjustable)
- Revolving light current: CC value * (1%-100%), default is 0.1 times
- Minimum voltage difference: 2V
- Output power: Natural Cooling 15W
SKU: n/a - Arduino, Arduino Components, Modules, Power, Relays
12V 30A 1-Channel Relay Module SLA-12VDC-SL-C
- 12V 30A 1-Channel Relay Module with Optocoupler H/L Level Triger for Arduino
- 30A relay module, normally open interface maximum load: AC 250V/30A, DV 30V/30A;
- Optical coupling isolation, driving ability is strong, stable performance;Trigger current is 5mA;
- Module can be set high level or low level trigger by the jumper;
- Power indicator light (green), relay status indicator light (red);
- Module Size:50mm*33mm*24mm;
SKU: n/a - Modules, Power, Voltage Converters
AT30 Buck Boost Voltage Converter Module
- Input voltage: 4-30V
- Output voltage: 0.5-30V
- Output current: 3A, 4A with cooling fan
- Output power: 30W without cooling fan,60W with cooling fan
- Output ripple: 30MV (Full output voltage)
- Conversion efficiency: Boost, 88%-91%; Buck,87%-90%.
- Short circuit protection: Yes
- Working frequency: 180KHz
- Size: 48*23*21mm
SKU: n/a - Power, Relays
8 Channel 5v Optically Isolated Relay Module
- 8 Channel Relay Module
- Operating Voltage: 5v DC
- Relay contact capacity: 250v AC 10A, or 30v DC 10A
- Optically Isolated from Mains
- Relay output: normally open, normally closed
- Low level Trigger
- signal input voltage range: 0 – 5 v
- Compatible with Arduino, PIC, AVR etc
SKU: n/a - Arduino, Arduino Components, Power, Relays
1 Channel 5v Optically Isolated Relay Module
- Operating Voltage: 5v DC
- Relay contact capacity: 250v AC 10A, or 30v DC 10A
- Optically Isolated from Mains
- Relay output: normally open, normally closed
- Low level Trigger
- signal input voltage range: 0-5 v
- Compatible with Arduino, PIC, AVR etc
SKU: n/a - Arduino, Arduino Components, Input, Modules, Power, Relays
2 Channel 5v Optically Isolated Relay Module
Arduino, Arduino Components, Input, Modules, Power, Relays2 Channel 5v Optically Isolated Relay Module
- Operating Voltage: 5v DC
- Relay contact capacity: 250v AC 10A, or 30v DC 10A
- Optically Isolated from Mains
- Relay output: normally open, normally closed
- Low level Trigger
- signal input voltage range: 0-5 v
- VCC is power supply to board. JD – VCC is relay power supply (Default: JD – VCC and VCC Jumper)
- Compatible with Arduino, PIC, AVR etc
SKU: n/a - Power, Voltage Converters, Wires and Cables
Male Plug Cigarette Lighter Socket Power Adapter with Fuse
Power, Voltage Converters, Wires and CablesMale Plug Cigarette Lighter Socket Power Adapter with Fuse
- Connector Type: Cigarette Lighter Plug (Car, Truck, SUV)
- Maximum Output Current: 5.0A
- Input Voltage: DC 12~35V
- 12v & 24v Power Supply According to Input
- To operate Router & Modems On The Go.
- Charge your Radio etc
SKU: n/a
