Power
Showing 97–120 of 152 resultsSorted by popularity
- Power
Power Bank Case for 2X 18650
- This is Mobile Power Bank kit
- 18650 battery is not included.
- The battery must be installed in right direction before you can use.
- Installing the battery must pay attention to the positive and negative, anti-loaded will burn, burned out is not returned.
- This is a DIY Kit, Put 2x 18650 Batteries & Enjoy Power Bank.
SKU: n/a - 433 Mhz, Arduino, Arduino Components, Modules, Power, Relays, Wireless
1 Channel Wireless 433Mhz Remote Control Relay Module 220v
433 Mhz, Arduino, Arduino Components, Modules, Power, Relays, Wireless1 Channel Wireless 433Mhz Remote Control Relay Module 220v
- Input Voltage: AC85V-AC220V
- RF Frequency: 315/433MHZ
- RF Working mode:Super heterodyne receiver
- Receiver Sensitivity: -107dBm
- Remote Control Distance: >100 meter(In open environment)
- Remote Control sold seperately
- works with 433 mhz remote control with encoding type ev1527 pt2262 etc
- Decoding Way: MCU Software decoding
- Can store the number of remote control:32
- Support remote control type: Fixed code, learning code
- Channel: 1CH
SKU: n/a - Power, Tools
UNI-T UT201 Digital Clamp Multimeter Ampere Meter
Model: UT201
- AC Current (A): 2A/20A/200A/400A ±(1.5%+5)
- AC Voltage (V): 2V/20V/200V/600V ±(1.2%+5)
- DC Voltage (V): 200mV/2V/20V/200V/600V ±(0.8%+1)
- Resistance (Ω): 200Ω/2KΩ/20KΩ/200KΩ/2MΩ/20MΩ ±(1%+2)
- Temperature (°C): -40°C -1000°C ±(1%+3)
- Temperature (°F): -40°F-1832°F ±(1%+6)General Characteristic:
- Power: 1.5V Batteries(R03) * 2 (not included)
- LCD Size: 35.6mm * 18 mm
- Product Color: Red and Grey
- Product Net Weight: 220g
- Product Size: 210mm * 75.6mm * 30 mm
- Package Size: 24 * 9 * 6cm / 9.4 * 3.6 * 2.4in Package Weight: 384g / 13.6oz
SKU: n/a - Power, Relays
4 Channel 5v Optically Isolated Relay Module
- Operating Voltage: 5v DC
- Relay contact capacity: 250v AC 10A, or 30v DC 10A
- Optically Isolated from Mains
- Relay output: normally open, normally closed
- Low level Trigger
- signal input voltage range: 0 – 5 v
- Compatible with Arduino, PIC, AVR etc
SKU: n/a - Power, Tools
UNI-T UT203 Digital Clamp Multimeter Ampere Meter
Model: UT203
- AC Current (A): 40A/400A ±(2.5%+5)
- DC Current (A): 40A/400A ±(2%+3)
- AC Voltage (V): 4V/40V/400V/600V ±(1%+5)
- DC Voltage (V): 400mV/4V/40V/400V/600V ±(0.8%+1)
- Resistance (Ω): 400Ω/4kΩ/40kΩ/400kΩ/4MΩ/40MΩ ±(1%+2)
- Frequency (Hz): 10Hz~1MHz ±(0.1%+3)
SKU: n/a - Arduino, Arduino Components, Modules, Power, Relays, Sensors
XH-W1219 LED Digital Thermostat Temperature Controller
Arduino, Arduino Components, Modules, Power, Relays, SensorsXH-W1219 LED Digital Thermostat Temperature Controller
- This is Universal Digital Thermostat
- Temperature Control Module can be used to control the temperature of anything (Solid or Liquid or Air)
- Set the Specific Temperature You Want to Maintain.
- Module operates on 12v DC
- You can control DC or AC Appliances
- Recommended for Incubation
SKU: n/a - Arduino, Robotics
Mini Micro 9g 1.6KG Servo SG90
- Model: SG90
- Technical data given by the manufacturers:
- Size: 21.5mmX11.8mmX22.7mm
- Weight: 9 grams
- No-load speed: 0.12 seconds / 60 degrees (4.8V)
- Stall torque of 1.2 – 1.4 kg / cm (4.8V)
- Operating temperature: -30 to +60 degrees Celsius
- Dead-set: 7 microseconds
- Operating voltage: 4.8V-6V
SKU: n/a - Modules, Power, Voltage Converters
DC-DC Step Up Down Boost Buck Voltage Converter Module LM2577S LM2596S
Modules, Power, Voltage ConvertersDC-DC Step Up Down Boost Buck Voltage Converter Module LM2577S LM2596S
- Input Voltage :4-35V
- Output voltage: Continuously adjustable(1.25-25V unload adjust)
- Output current: 3A Max(If more than 15W, please install the heat sink)
- CC range :0-2A (adjustable)
- Revolving light current: CC value * (1%-100%), default is 0.1 times
- Minimum voltage difference: 2V
- Output power: Natural Cooling 15W
SKU: n/a - Arduino, Arduino Components, Modules, Power, Relays
12V 30A 1-Channel Relay Module SLA-12VDC-SL-C
- 12V 30A 1-Channel Relay Module with Optocoupler H/L Level Triger for Arduino
- 30A relay module, normally open interface maximum load: AC 250V/30A, DV 30V/30A;
- Optical coupling isolation, driving ability is strong, stable performance;Trigger current is 5mA;
- Module can be set high level or low level trigger by the jumper;
- Power indicator light (green), relay status indicator light (red);
- Module Size:50mm*33mm*24mm;
SKU: n/a - Modules, Power, Voltage Converters
AT30 Buck Boost Voltage Converter Module
- Input voltage: 4-30V
- Output voltage: 0.5-30V
- Output current: 3A, 4A with cooling fan
- Output power: 30W without cooling fan,60W with cooling fan
- Output ripple: 30MV (Full output voltage)
- Conversion efficiency: Boost, 88%-91%; Buck,87%-90%.
- Short circuit protection: Yes
- Working frequency: 180KHz
- Size: 48*23*21mm
SKU: n/a - Power, Relays
8 Channel 5v Optically Isolated Relay Module
- 8 Channel Relay Module
- Operating Voltage: 5v DC
- Relay contact capacity: 250v AC 10A, or 30v DC 10A
- Optically Isolated from Mains
- Relay output: normally open, normally closed
- Low level Trigger
- signal input voltage range: 0 – 5 v
- Compatible with Arduino, PIC, AVR etc
SKU: n/a - Arduino, Arduino Components, Power, Relays
1 Channel 5v Optically Isolated Relay Module
- Operating Voltage: 5v DC
- Relay contact capacity: 250v AC 10A, or 30v DC 10A
- Optically Isolated from Mains
- Relay output: normally open, normally closed
- Low level Trigger
- signal input voltage range: 0-5 v
- Compatible with Arduino, PIC, AVR etc
SKU: n/a - Arduino, Arduino Components, Input, Modules, Power, Relays
2 Channel 5v Optically Isolated Relay Module
Arduino, Arduino Components, Input, Modules, Power, Relays2 Channel 5v Optically Isolated Relay Module
- Operating Voltage: 5v DC
- Relay contact capacity: 250v AC 10A, or 30v DC 10A
- Optically Isolated from Mains
- Relay output: normally open, normally closed
- Low level Trigger
- signal input voltage range: 0-5 v
- VCC is power supply to board. JD – VCC is relay power supply (Default: JD – VCC and VCC Jumper)
- Compatible with Arduino, PIC, AVR etc
SKU: n/a - Power, Voltage Converters, Wires and Cables
Male Plug Cigarette Lighter Socket Power Adapter with Fuse
Power, Voltage Converters, Wires and CablesMale Plug Cigarette Lighter Socket Power Adapter with Fuse
- Connector Type: Cigarette Lighter Plug (Car, Truck, SUV)
- Maximum Output Current: 5.0A
- Input Voltage: DC 12~35V
- 12v & 24v Power Supply According to Input
- To operate Router & Modems On The Go.
- Charge your Radio etc
SKU: n/a

1 Channel SSR G3MB-202P Solid State Relay Module
DK124 High Performance Switch Mode Power Controller IC
SM8013C Switching Supply PWM PFM Power Management IC
Flexible USB LED Portable Light
AT30 Buck Boost Voltage Converter Module















