GY-291 ADXL345 Digital 3 Axis Digital Gravity SensorSubtotal: ₨400
Arduino Components
Showing 73–96 of 130 resultsSorted by popularity
- Arduino Components, Arduino Shields, Development Boards, Modules
HW-584 RJ45 Network Internet Relay Control Switch 5v W5100
Arduino Components, Arduino Shields, Development Boards, ModulesHW-584 RJ45 Network Internet Relay Control Switch 5v W5100
- Model: HW-584
- Channel: 8 Channel, 16Channel (Both relay boards Supported)
- External power supply voltage: 5V DC 2A
- Network assistant set serial port
- Protocol: TCP/IP
- IP: 192.168.1.4
- Port number: 3000
SKU: n/a - Arduino, Arduino Components, Modules, Power, Relays, Sensors
XH-W1219 LED Digital Thermostat Temperature Controller
Arduino, Arduino Components, Modules, Power, Relays, SensorsXH-W1219 LED Digital Thermostat Temperature Controller
- This is Universal Digital Thermostat
- Temperature Control Module can be used to control the temperature of anything (Solid or Liquid or Air)
- Set the Specific Temperature You Want to Maintain.
- Module operates on 12v DC
- You can control DC or AC Appliances
- Recommended for Incubation
SKU: n/a - Arduino Components, Transistor
DS2401 Hard Coded Silicon Serial Number One Wire
- Model DS2401
- Protocol: 1 Wire
- Multiple Devices Support on Same Bus
- Protect Your Programming with Unique Serial Number.
- Extended 2.8V to 6.0V Range
- Unique, Factory-Lasered and Tested 64-Bit Registration Number (8-Bit Family Code + 48-Bit Serial Number + 8-Bit CRC Tester)
- Guaranteed No Two Parts Alike
SKU: n/a - Arduino, Arduino Components, Arduino Shields, Modules
3D Printer Engraving Machine A4988 Drive Extension CNC Shield For Arduino
Arduino, Arduino Components, Arduino Shields, Modules3D Printer Engraving Machine A4988 Drive Extension CNC Shield For Arduino
- This expansion board as a driver expansion board, can be used for engraving machines, 3D printers.
- It is a total of four slots, can drive four A4988 Stepper Motor.
- Each road Stepper Motors only need two IO ports.
- In other words, six IO ports can be well managed three stepper motors.
- Very Convenient to use.
SKU: n/a - Arduino, Arduino Components, Modules, Power, Relays
12V 30A 1-Channel Relay Module SLA-12VDC-SL-C
- 12V 30A 1-Channel Relay Module with Optocoupler H/L Level Triger for Arduino
- 30A relay module, normally open interface maximum load: AC 250V/30A, DV 30V/30A;
- Optical coupling isolation, driving ability is strong, stable performance;Trigger current is 5mA;
- Module can be set high level or low level trigger by the jumper;
- Power indicator light (green), relay status indicator light (red);
- Module Size:50mm*33mm*24mm;
SKU: n/a - Arduino, Arduino Components, Power, Relays
1 Channel 5v Optically Isolated Relay Module
- Operating Voltage: 5v DC
- Relay contact capacity: 250v AC 10A, or 30v DC 10A
- Optically Isolated from Mains
- Relay output: normally open, normally closed
- Low level Trigger
- signal input voltage range: 0-5 v
- Compatible with Arduino, PIC, AVR etc
SKU: n/a - Arduino, Arduino Components, Input, Modules, Power, Relays
2 Channel 5v Optically Isolated Relay Module
Arduino, Arduino Components, Input, Modules, Power, Relays2 Channel 5v Optically Isolated Relay Module
- Operating Voltage: 5v DC
- Relay contact capacity: 250v AC 10A, or 30v DC 10A
- Optically Isolated from Mains
- Relay output: normally open, normally closed
- Low level Trigger
- signal input voltage range: 0-5 v
- VCC is power supply to board. JD – VCC is relay power supply (Default: JD – VCC and VCC Jumper)
- Compatible with Arduino, PIC, AVR etc
SKU: n/a - 2.4 Ghz, Arduino, Arduino Components, Modules, Wireless
SPP-C Bluetooth Module
- Bluetooth V2.1 + EDR
- Bluetooth Class 2
- Built-in PCB radio frequency antenna
- Support UART interface
- 3.3V power supply
- Status indication LED: P12
- Used to indicate the status of the Bluetooth module, LED flashing mode and Bluetooth module status corresponding to the following table:
- Mode LED Displays the module status
- (800 ms-on, 800 ms-off) waiting for pairing
- Host interrupt indication: P05
- Used to indicate whether the host is interrupted or not, the connection status is high, and other states are low.
SKU: n/a - Arduino, Arduino Components, Modules, Sensors
DS1302 RTC Real Time Clock Module
- DS1302 Real Time Clock Module
- Serial I/O interface for minimum pin count
- Wide Working Voltage: 2.0 ~ 5.5 V
- Single – byte and multi – byte transmission for clock or RAM data read/write
- TTL – compatible (Vcc) = 5 v
- Working Temperature: 0 to + 70 Deg C
- 32.768 KHz crystal oscillator
- Overall Size: Approx. 44 x 23 x 11 mm
SKU: n/a - Arduino, Arduino Components, Display, Modules, Robotics
2004 20×4 Character LCD Display Module
- Interface: I2c
- I2C Address: 0x20
- Back lit (Green with Black Character Color) (Blue with White Character Color)
- Fully Assembled and Tested Serial LCD 20×4 Module
- Display Format: 20 Characters x 4 lines
- Supply voltage: 5V
- The module can be easily interfaced with a MCU
- The module is a low-power consumption character LCD Module with a built-in controller
- Size: approx. 9.8cm x 6cm x 1.2cm
SKU: n/a - Arduino, Arduino Components
51 MCU Minimum System Development Programming Board
- Support chips: ATmega16/ATmega32 and chip which pin-compatible.
- 32 I/O pin all the leads.
- Classic ATmega16/32 minimum system, eliminating the hassle of soldering.
- Crystal: The socket hole welding facilitate the buyer to replace the crystal, 8M crystal.
- Power supply: power adapter or external expansion pin power supply (not support ISP download interface power supply)
- DC-005 Power Block (supporting the transposon is 5.5*2.1mm).
- Expand outside 4 channel VCC, GND.
- Reset: Power-on reset and reset button.
- Power LED (D1) and the program run indicator (D2).
- Standard ISP download interface.
SKU: n/a - Arduino, Arduino Components, Modules, Sensors
KY-026 IR Flame Sensor Fire Detection Module
- High sensitivity IR receiver
- Extremely sensitive to wave between 760-1100nm
- Power supply indicator lamp
- Comparator output indicator lamp
- AO, real-time thermister voltage signal output
- DO, high / low electric level signal output
- Analog quantity output
- Threshold rollover electric level output
- Threshold adjusted by potentiometer
- Detection Angle Range: About 60 degrees
- Power Supply: 0-15 V DC
- Hole Inner Diameter: Approx. 3mm
- Size (L x W): Approx. 36 x 16mm
SKU: n/a - Arduino, Arduino Components, Modules, Sensors
GY-291 ADXL345 Digital 3 Axis Digital Gravity Sensor
- GY-291 ADXL345 Digital 3 Axis Digital Gravity Sensor Module for Arduino & PIC
- ADXL345 is well suited for mobile device applications. It can tilt sensing applications
- Measures the static acceleration of gravity, you can measure motion or shock resulting from moving
- State acceleration. Its high resolution (3.9mg / LSB), capable of measuring less than 1.0 °
- Tilt angle change.
SKU: n/a - Arduino, Arduino Components, Input, Modules, Sensors
Reed Magnetic Sensor Module
- Normally Open Reed
- The comparator output signals clean, good waveform, driving ability, 15mA.
- The working voltage of 3.3V-5V
- The output form: digital switching output (0 and 1)
- A fixed bolt hole for easy installation
- Small PCB board size: 3.2cm x 1.4cm
- Using a wide voltage comparator LM393
SKU: n/a
