Relay
Showing all 19 resultsSorted by popularity
- Arduino Components, Modules, Power, Relays, Robotics
LED Display Automatic Cycle Delay Timer Control Relay
Arduino Components, Modules, Power, Relays, RoboticsLED Display Automatic Cycle Delay Timer Control Relay
- Operating voltage: 6–30V
- Support MicroUSB 5.0V Power Supply
- Trigger Source: Active-high (3.0V-24V), have optocoupler isolation, can improve the system’s anti-jamming capability (customers can also shorting common ground).
- Output capability: You can control the DC 30VDC 5A or 220VAC 5A device.
- Quiescent Current: 20mA; Operating Current: 50mA
- Life: more than 10 million times; Working temperature: -40-85 ; Size:
- With Optocoupler isolation, enhanced anti-jamming capability, industrial grade board.
SKU: n/a - Arduino Components, Modules, Power, Relays, Robotics
LED Display Automatic Cycle Delay Real Time Clock RTC Control Relay
Arduino Components, Modules, Power, Relays, RoboticsLED Display Automatic Cycle Delay Real Time Clock RTC Control Relay
- Operating voltage: 5.0V ~ 60V
- Support MicroUSB 5.0V Power Supply
- Trigger Source: Active-high (3.0V-24V),
- Output Capability: You can control the DC 30VDC 5A or 220VAC 10A device.
- Quiescent Current: 20mA; Operating Current: 50mA
- Life: more than 10 million times; Working temperature: -40-85
- This Module can be used to specifically Turn On / Turn Off an Electrical appliance on Specific Time for the specific duration
- This is Advanced Cyclic Timer Relay Module with Timer Clock function as well
SKU: n/a - Power, Relays
4 Channel 5v Optically Isolated Relay Module
- Operating Voltage: 5v DC
- Relay contact capacity: 250v AC 10A, or 30v DC 10A
- Optically Isolated from Mains
- Relay output: normally open, normally closed
- Low level Trigger
- signal input voltage range: 0 – 5 v
- Compatible with Arduino, PIC, AVR etc
SKU: n/a - Power, Relays
8 Channel 5v Optically Isolated Relay Module
- 8 Channel Relay Module
- Operating Voltage: 5v DC
- Relay contact capacity: 250v AC 10A, or 30v DC 10A
- Optically Isolated from Mains
- Relay output: normally open, normally closed
- Low level Trigger
- signal input voltage range: 0 – 5 v
- Compatible with Arduino, PIC, AVR etc
SKU: n/a - Arduino, Arduino Components, Power, Relays
1 Channel 5v Optically Isolated Relay Module
- Operating Voltage: 5v DC
- Relay contact capacity: 250v AC 10A, or 30v DC 10A
- Optically Isolated from Mains
- Relay output: normally open, normally closed
- Low level Trigger
- signal input voltage range: 0-5 v
- Compatible with Arduino, PIC, AVR etc
SKU: n/a - Arduino, Arduino Components, Input, Modules, Power, Relays
2 Channel 5v Optically Isolated Relay Module
Arduino, Arduino Components, Input, Modules, Power, Relays2 Channel 5v Optically Isolated Relay Module
- Operating Voltage: 5v DC
- Relay contact capacity: 250v AC 10A, or 30v DC 10A
- Optically Isolated from Mains
- Relay output: normally open, normally closed
- Low level Trigger
- signal input voltage range: 0-5 v
- VCC is power supply to board. JD – VCC is relay power supply (Default: JD – VCC and VCC Jumper)
- Compatible with Arduino, PIC, AVR etc
SKU: n/a - Power, Relays
1 Channel SSR G3MB-202P Solid State Relay Module
- 5V Omron solid state relay 240V 2A, output with resistive fuse 240V 2A
- Size: 25*34*21mm/0.98*1.35*0.82”
- Input Power: 5V DC (160mA)
- Input control signal voltage:
(0-1.5V state low relay ON)
(2.5-5V state high relay OFF) - DC +: positive power supply (by relay voltage power supply)
- DC-: connect power negative
- CH: relay module signal to trigger the end (low level to trigger effective)
SKU: n/a - Power, Relays
RP920124 6Pin Relay 24v Coil 250V AC 8A
- Model / Part Number: RP920124
- Condition: Refurbshed
- This Relay Module is widely used in branded UPS like APC & Dell etc
- Usually when mains voltage fluctuates a lot this relay fails, & then there is no switching or UPS cant convert to mains & remains on Backup Mode.
- By just replace this relay switching problem solves.
SKU: n/a - Power, Relays
2 Channel SSR G3MB-202P Solid State Relay Module
- 5V Omron solid state relay 240V 2A, output with resistive fuse 240V 2A
- Size: 25*34*21mm/0.98*1.35*0.82”
- Input Power: 5V DC (160mA)
- Input control signal voltage:
- (0-1.5V state low relay ON)
- (2.5-5V state high relay OFF)
- DC +: positive power supply (by relay voltage power supply)
- DC-: connect power negative
- CH: relay module signal to trigger the end (High level to trigger effective)
SKU: n/a - Power, Relays
RP710024 Relay 24v Coil 250V AC 16A
- Model / Part Number: RP710024
- This Relay Module is widely used in branded UPS like APC & Dell etc
- Usually when mains voltage fluctuates a lot this relay fails, & then there is no switching or UPS cant convert to mains & remains on Backup Mode.
- By just replace this relay switching problem solves.
SKU: n/a - Power, Relays
8 Channel SSR G3MB-202P Solid State Relay Module
- OMRON 5V 240V solid state relay 2A, output with resistance type fuse 240V 2A.
- Size: 57*55*25 (length * width * height) net weight: 40g
- The input power supply: 5V DC (160MA)
- The input control signal voltage:
- (0-2.5V the state of low level relay OFF)
- (3.3-5V high level relay ON)
- The 2.54CM pin and blue KF301 terminal is connected to the line of control more convenient.
SKU: n/a - Power, Relays
4 Channel SSR G3MB-202P Solid State Relay Module
- OMRON 5V 240V solid state relay 2A, output with resistance type fuse 240V 2A.
- Size: 57*55*25 (length * width * height) net weight: 40g
- The input power supply: 5V DC (160MA)
- The input control signal voltage:
- (0-2.5V the state of low level relay OFF)
- (3.3-5V high level relay ON)
- The 2.54CM pin and blue KF301 terminal is connected to the line of control more convenient.
SKU: n/a

2.54mm PCB Jumper Short Circuit Cap Shunts
Nokia 84x84 Graphic LCD Display Module
SW-420 Normally Closed Vibration Sensor Module
L7809CV LM7809 L7809 TO-220 9V 1A Voltage Regulator
PLCC32 to DIP32 IC Adapter Socket Converter
16 Key 4 x 4 Membrane Switch Keypad
MP3 Remote Control and VS1838 IR Receiver
RP710024 Relay 24v Coil 250V AC 16A













