Sensors
Showing 1–24 of 34 resultsSorted by popularity
- Arduino, Arduino Components, Modules, Power, Relays, Sensors
W1209 LED Digital Thermostat Temperature Control
Arduino, Arduino Components, Modules, Power, Relays, SensorsW1209 LED Digital Thermostat Temperature Control
- This is Universal Digital Thermostat
- Temperature Control Module can be used to control the temperature of anything (Solid or Liquid or Air)
- Set the Specific Temperature You Want to Maintain.
- Module operates on 12v DC
- You can control DC or AC Appliances
- Recommended for Incubation
SKU: n/a - Arduino, Arduino Components, Modules, Sensors, Wireless
GY-NEO6MV2 GPS Module RS232 TTL Output
- Voltage: 3.3 V-5 V
- Size: 36mm * 24mm
- Baud-rate default: 9600bps
- Preconfigured: Just give it power & it will start transmitting GPS data on tx pin
- Compatible with Arduino PIC AVR etc
- Export & view on Google Maps
SKU: n/a - Modules, Sensors
XH-M452 LED Digital Thermostat Temperature Humidity Control Dual Output
- Digital Thermostat, Temperature Control Module can be used to control the Temperature & Humidity, Set the specific Temperature & Humidity you want to maintain.
- Power Supply :DC 12V
- Temperature Measurement Range:-40~120℃
- Humidity Range:0~100%RH
- Control Precision:0.1℃ 0.1%RH
- Test Probe:Integrated Sensor (Temperature & Humidity)
- Output: 2 Relays 10A
- Size:65*55*28mm
SKU: n/a - Arduino, Arduino Components, Modules, Sensors
HC-SR501 PIR Infrared Motion Sensor Detector Module
- Color: White + Green
- Dimension: 3.2cm x 2.4cm x 1.8cm (approx)
- Infrared sensor with control circuit board
- The sensitivity and holding time can be adjusted
- Working Voltage Range: DC 4.5V- 20V
- Current drain:<60uA
SKU: n/a - Arduino, Arduino Components, Modules, Sensors
Infrared Reflective Obstacle Avoidance Sensor
- Sensor module output port OUT can be directly connected with the microcontroller IO port.
- Can also directly drive a 5V relay; Connection: VCC-VCC; GND-GND; OUT-IO
- The Comparator with LM393, Stable.
- Can be used 3.3V-5V DC power supply module. When the power is turned on, the red power indicator light;
- VCC external 3.3V-5V voltage (can be directly connected with the 5v microcontroller or 3.3v single-chip)
- GND external GND
- OUT small board digital output interface (0 and 1)
SKU: n/a - Modules, Power, Relays, Sensors
XH-W3001 Digital Thermostat Temperature Control
- Temperature measurement range: – 50 ~ 110
- Temperature control range: – 50 ~ 110
- Operating Voltage: 12v DC | 220v AC
- Control Voltage: 1v – 250v
- Load: Upto 1500W
- Temperature measuring accuracy: plus or minus 0.2 degree
- Temperature control precision: plus or minus 0.1 degree
- Measuring input: NTC10K L = 1 meters waterproof probe
- Input power: according to the classification of choice
- Output power: according to the classification of choice
- Appearance size: 60 * 45 * 31 mm
SKU: n/a - Arduino, Arduino Components, Modules, Sensors
SW-420 Normally Closed Vibration Sensor Module
- The company produced normally closed type vibration sensor SW-420
- The comparator output, signal clean, good waveform, driving ability is strong, for more than 15 ma
- The working voltage of 3.3V to 5V
- Output form: digital switch output (0 and 1)
- Has a fixed bolt hole, convenient installation
- Small board PCB size: 3.2cm x 1.4cm
- Use the LM393 wide voltage comparator
SKU: n/a - Arduino, Arduino Components, Modules, Power, Relays, Sensors
W1209WK LED Digital Thermostat Temperature Control
Arduino, Arduino Components, Modules, Power, Relays, SensorsW1209WK LED Digital Thermostat Temperature Control
- Digital Thermostat
- Temperature Control Module can be used to control the temperature of anything (Solid or Liquid)
- Set the Specific Temperature You Want to Maintain.
- Module operates on 12v DC
- You can control DC or AC Appliances
- Used for Incubation
SKU: n/a - Arduino, Arduino Components, Modules, Sensors
SW520D Tilt Sensor Module Module
- Using high-sensitivity switch SW 520D as the sensor.
- The module is equipped with fixed bolt hole for convenient installation.
- Using LM393 wide voltage comparator,clean signal,good waveform,strong driving ability with output of more than 15 mA.
- The working voltage of 3.3V to 5V.
- Small PCB size:3.2cm x 1.4cm.
- Digital output form: digital switch output (0 and 1).
SKU: n/a - Arduino, Arduino Components, Sensors
HW-MS03 Microwave Radar Human Inductive Motion Sensor
- Category: Digital sensor
- Sensor Type: 2.4GHz / 5.8Ghz radar sensors
- Independent of temperature, humidity, airflow, dust, noise, light and dark and other effects, anti-jamming;
- The microwave transceiver module is a field-shaped signal, wide coverage and no blind spots;
- During transmission of microwave induced effect is relatively good: when used indoors
SKU: n/a - Arduino, Arduino Components, Sensors
Soil Moisture Detection Humidity Sensor Module
- Operating Voltage 3.3V-5V
- Module Dual Output mode , a simple digital output , analog output more accurate.
- With fixed bolt hole for easy installation
- Small PCB board size : 3cm * 1.6cm
- Power Indicator ( red ) and the digital switch output Indicator ( green )
- Using LM393 Comparator Chip , Stable
- VCC external 3.3V-5V
- GND GND External
- DO small board digital output interfaces ( 0 and 1 )
- AO small board analog output interface
SKU: n/a - Modules, Sensors
W1401 LED Digital Thermostat Temperature Control
- Digital Thermostat, Temperature Control Module can be used to control the temperature of anything (Solid or Liquid), Set the specific temperature you want to maintain.
- Module operates on 12v DC
- Can be used for Incubation
- Eggs Hatching
- You can control DC or AC appliances
SKU: n/a - Arduino, Arduino Components, Modules, Sensors
Microphone Sensor Sound Detection Module
- Operating Voltage: 3v to 5.5v
- Sound Detection Module has two output
- AO, analog output, real-time output voltage signal of the microphone
- DO, when the sound intensity reaches a certain threshold, the output high and low signal
SKU: n/a - Arduino, Arduino Components, Modules, Power, Relays, Sensors
XH-W1219 LED Digital Thermostat Temperature Controller
Arduino, Arduino Components, Modules, Power, Relays, SensorsXH-W1219 LED Digital Thermostat Temperature Controller
- This is Universal Digital Thermostat
- Temperature Control Module can be used to control the temperature of anything (Solid or Liquid or Air)
- Set the Specific Temperature You Want to Maintain.
- Module operates on 12v DC
- You can control DC or AC Appliances
- Recommended for Incubation
SKU: n/a - Arduino, Arduino Components, Modules, Sensors
DS1302 RTC Real Time Clock Module
- DS1302 Real Time Clock Module
- Serial I/O interface for minimum pin count
- Wide Working Voltage: 2.0 ~ 5.5 V
- Single – byte and multi – byte transmission for clock or RAM data read/write
- TTL – compatible (Vcc) = 5 v
- Working Temperature: 0 to + 70 Deg C
- 32.768 KHz crystal oscillator
- Overall Size: Approx. 44 x 23 x 11 mm
SKU: n/a - Arduino, Arduino Components, Modules, Sensors
KY-026 IR Flame Sensor Fire Detection Module
- High sensitivity IR receiver
- Extremely sensitive to wave between 760-1100nm
- Power supply indicator lamp
- Comparator output indicator lamp
- AO, real-time thermister voltage signal output
- DO, high / low electric level signal output
- Analog quantity output
- Threshold rollover electric level output
- Threshold adjusted by potentiometer
- Detection Angle Range: About 60 degrees
- Power Supply: 0-15 V DC
- Hole Inner Diameter: Approx. 3mm
- Size (L x W): Approx. 36 x 16mm
SKU: n/a - Arduino, Arduino Components, Modules, Sensors
GY-291 ADXL345 Digital 3 Axis Digital Gravity Sensor
- GY-291 ADXL345 Digital 3 Axis Digital Gravity Sensor Module for Arduino & PIC
- ADXL345 is well suited for mobile device applications. It can tilt sensing applications
- Measures the static acceleration of gravity, you can measure motion or shock resulting from moving
- State acceleration. Its high resolution (3.9mg / LSB), capable of measuring less than 1.0 °
- Tilt angle change.
SKU: n/a - Arduino, Arduino Components, Input, Modules, Sensors
Reed Magnetic Sensor Module
- Normally Open Reed
- The comparator output signals clean, good waveform, driving ability, 15mA.
- The working voltage of 3.3V-5V
- The output form: digital switching output (0 and 1)
- A fixed bolt hole for easy installation
- Small PCB board size: 3.2cm x 1.4cm
- Using a wide voltage comparator LM393
SKU: n/a

WINBOND W25Q32 Flash Memory Chip 32Mbit 4MB
SOP8 SSOP8 TSSOP8 SMD to DIP8 PCB for Programmer
SOIC8 SOP8 to DIP8 Socket Adapter 200mil Wide Body
PLCC32 to DIP32 IC Adapter Socket Converter
USB to RS485 TTL Serial Converter Adapter
RS232 Serial COM Convert USB 2.0 to 9-Pin DB9 Male Adapter
DB9 9 Pin Female 2 Rows Solder Type Plug
1 Channel Wireless 433Mhz Remote Control Relay Module 12V
PAM8403 Digital Class D Audio Amplifier Board
Sound & Light Sensor Switch for Automatic Light On Off 220V
PAM8403 5v Digital Amplifier Board with Potentiometer
433Mhz RF Wireless Remote Control 2 Channel
433Mhz Wireless Remote Control 4 Channel
SS8550 8550 NPN Transistor TO-92
AMS1117 1.8v 800mA Low Dropout Voltage Regulator
XL6009 DC-DC Boost Step Up Module
AMS1117 3.3v 800mA Low Dropout Voltage Regulator
6Pin SOT23 Buck Voltage Regulator for Receiver & LCD
HC-SR501 PIR Infrared Motion Sensor Detector Module
SW-420 Normally Closed Vibration Sensor Module
KY-026 IR Flame Sensor Fire Detection Module
















