- ×
MB10S 1000V 0.5A SOP4 Rectifier Diode Bridge1 × ₨20 - ×
MB6M 600V 0.5A DIP4 Rectifier Diode Bridge1 × ₨20 - ×
Soil Moisture Detection Humidity Sensor Module1 × ₨250 - ×
DC-DC 5A Step Down Buck Converter XL40151 × ₨550
Subtotal: ₨840
Modules
Showing 121–144 of 172 resultsSorted by popularity
- 2.4 Ghz, Arduino, Arduino Components, Modules, Wireless
SPP-C Bluetooth Module
- Bluetooth V2.1 + EDR
- Bluetooth Class 2
- Built-in PCB radio frequency antenna
- Support UART interface
- 3.3V power supply
- Status indication LED: P12
- Used to indicate the status of the Bluetooth module, LED flashing mode and Bluetooth module status corresponding to the following table:
- Mode LED Displays the module status
- (800 ms-on, 800 ms-off) waiting for pairing
- Host interrupt indication: P05
- Used to indicate whether the host is interrupted or not, the connection status is high, and other states are low.
SKU: n/a - Modules
USB External 3D Soundcard 3.5mm Mic & Headphones
- Plug & Play USB 2.0
- Supports 3D sound (Ac-3) Stereo 5.1-channel sound track, virtual speaker shifter
- Self-defining balanced mode
- Headphone & Microphone 3.5mm jack
- Compatible with: Digital devices which have an USB port
- Supported OS: Windows, Windows 98/2000/Me/XP, OS Mac 8.6 above
- Interface: USB 2.0
SKU: n/a - Arduino, Arduino Components, Modules, Sensors
DS1302 RTC Real Time Clock Module
- DS1302 Real Time Clock Module
- Serial I/O interface for minimum pin count
- Wide Working Voltage: 2.0 ~ 5.5 V
- Single – byte and multi – byte transmission for clock or RAM data read/write
- TTL – compatible (Vcc) = 5 v
- Working Temperature: 0 to + 70 Deg C
- 32.768 KHz crystal oscillator
- Overall Size: Approx. 44 x 23 x 11 mm
SKU: n/a - Arduino, Arduino Components, Display, Modules, Robotics
2004 20×4 Character LCD Display Module
- Interface: I2c
- I2C Address: 0x20
- Back lit (Green with Black Character Color) (Blue with White Character Color)
- Fully Assembled and Tested Serial LCD 20×4 Module
- Display Format: 20 Characters x 4 lines
- Supply voltage: 5V
- The module can be easily interfaced with a MCU
- The module is a low-power consumption character LCD Module with a built-in controller
- Size: approx. 9.8cm x 6cm x 1.2cm
SKU: n/a - Arduino, Arduino Boards, Development Boards, Modules
Arduino MEGA2560 With CH340G
- Microcontroller Atmega2560
- Serial Controller CH340 / Ch340G
- Operating Voltage 5V
- Input Voltage (recommended) 7-12V
- Input Voltage (limits) 6-20V
- Digital I/O Pins 54 (of which 15 provide PWM Output)
- Analog Input Pins 16
- DC Current per I/O Pin 40 mA
- DC Current for 3.3V Pin 50 mA
- Flash Memory 256 KB of which 8 KB used by Bootloader
- SRAM 8 KB
- EEPROM 4 KB
SKU: n/a - 5 Ghz, Modules, Wireless
TX5813 5.8GHz 10mW Video Transmitter Module
Item Name: Audio Video Transmitter TX5813
- Transmitter Frequency: 5725-5865MHz; 8channels
- Transmitting Power: 10dBm /10mW
- Transmitting Distance: further than 200 meters
- Frequency Control: built-in frequency and phase lock loop
- AV Input: analog AV signal input
- Power Supply Voltage: 3.5V
- Supply Current: 170mA
SKU: n/a - Arduino, Arduino Components, Modules, Sensors
KY-026 IR Flame Sensor Fire Detection Module
- High sensitivity IR receiver
- Extremely sensitive to wave between 760-1100nm
- Power supply indicator lamp
- Comparator output indicator lamp
- AO, real-time thermister voltage signal output
- DO, high / low electric level signal output
- Analog quantity output
- Threshold rollover electric level output
- Threshold adjusted by potentiometer
- Detection Angle Range: About 60 degrees
- Power Supply: 0-15 V DC
- Hole Inner Diameter: Approx. 3mm
- Size (L x W): Approx. 36 x 16mm
SKU: n/a - Arduino, Arduino Components, Modules, Sensors
GY-291 ADXL345 Digital 3 Axis Digital Gravity Sensor
- GY-291 ADXL345 Digital 3 Axis Digital Gravity Sensor Module for Arduino & PIC
- ADXL345 is well suited for mobile device applications. It can tilt sensing applications
- Measures the static acceleration of gravity, you can measure motion or shock resulting from moving
- State acceleration. Its high resolution (3.9mg / LSB), capable of measuring less than 1.0 °
- Tilt angle change.
SKU: n/a - Arduino, Arduino Components, Input, Modules, Sensors
Reed Magnetic Sensor Module
- Normally Open Reed
- The comparator output signals clean, good waveform, driving ability, 15mA.
- The working voltage of 3.3V-5V
- The output form: digital switching output (0 and 1)
- A fixed bolt hole for easy installation
- Small PCB board size: 3.2cm x 1.4cm
- Using a wide voltage comparator LM393
SKU: n/a - Components, Modules, Sensors
Boya BY-M1 Omni Directional Lavalier Microphone
- For SmartPhones Camcorders, DSLR, Audio Recorders, PC etc
- Clip-On Mic for Smartphones, DSLR, Camcorders, Audio recorders, PC etc.
- Omni Directional Condenser Microphone
- High-Quality Condenser is ideal for video use
- Low Handling Noise
- Includes lapel clip, Foam Windscreen, 1/4” Adapter ( LR44 Battery included)
SKU: n/a - Modules, Power, Voltage Converters
DC-DC 5A Step Down Buck Converter XL4015
- Input voltage range:4~38VDC(Note:input voltage not exceeding 38V)
- Output voltage range:1.25-36VDC adjustable
- Output current: 0-5A, recommended for use in 4.5A.
- Output power: 75W
- Working temperature: -40~+85 degrees
- Operating frequency: 180KHz
- Efficiency:96%(max)
SKU: n/a - 2.4 Ghz, GSM, Modules, Sensors, Wireless
Mini GSM GPRS GPS Tracker Vehicle Bike Real Time Tracker
- Type: GPS Tracker
- Color: Black
- GMS Frequency: 900MHz/1800MHz or 850MHz/1900MHz
- GPRS: Class12,TCP/IP
- Voltage Range: DC 9-38V
- Standby Current: ≈0.2mA
- Power Consumption: 0.3w/h
- GPS Initialization: Cold Boot 38s (Open sky)
- Warm boot: 2s (Open sky)
- GPS Accuracy: 10m(2D RM)
- Working Temperature: -2℃ – +70℃
- Working Humidity: 20%-80%RH
SKU: n/a - 2.4 Ghz, Arduino, Arduino Components, Espressif, Modules, Wireless
ESP8266 07 Wifi Module
- Improve the peripheral circuit
- Enhanced impedance matching
- Signal output is better, whether it is stable or anti jamming ability
- IPEX Connector For External Antenna
- PCB antenna after professional laboratory testing, perfect matching, after ROHS certification, have been greatly improved!
- The enhanced version is fully compatible with the firmware before the ESP-12, based on the SPI and the new six IO port
- Development is more convenient, more widely used!
- Node MCU Compatible
- Arduino IDE Compatible
SKU: n/a - Arduino, Arduino Components, Display, Modules, Robotics
2002 20×2 Character LCD Display Module Blue Backlight
Arduino, Arduino Components, Display, Modules, Robotics2002 20×2 Character LCD Display Module Blue Backlight
- Interface: I2c
- I2C Address: 0x20
- Back lit (Blue with White Character Color)
- Fully Assembled and Tested Serial LCD 20×4 Module
- Display Format: 20 Characters x 4 lines
- Supply voltage: 5V
- The module can be easily interfaced with a MCU
- The module is a low-power consumption character LCD Module with a built-in controller
- Size: approx. 116x37X13mm
SKU: n/a
