DS1307 AT24C32 Real Time Clock module with EEPROMSubtotal: ₨180
Modules
Showing 73–96 of 172 resultsSorted by popularity
- Components, Modules, Programmer Accessories, Wires and Cables
RS232 to RS485 Industrial Serial Converter Adapter
Components, Modules, Programmer Accessories, Wires and CablesRS232 to RS485 Industrial Serial Converter Adapter
- Interface RS232 DB9 Female Connector
- Compatible with EIA/TIA RS-232 & RS-485 Standard
- Work environment:-10degree to 86 degree,relative humidity:5% to 95%
- Transmission Distance: RS485 max 1200m , RS232 Side max.5m
- Transmission Rate: 300-115200bps, which is capable of applying between device & host computer.
- Dimension:5.5cm x 3.5cm x 1.8cm(LxWxH)
SKU: n/a - Arduino, Arduino Components, GSM, Modules, Wireless
SIM900A GPRS GSM Module
- Chip: SIM900A by SIMCOM
- Dual-Band 900/ 1800 MHz
- GPRS multi-slot class 10/8GPRS mobile station class B
- Compliant to GSM phase 2/2+
- Dimensions: 24*24*3 mm
- Weight: 3.4g
- Control via AT commands (GSM 07.07 ,07.05 and SIMCOM enhanced AT Commands)
- Supply voltage range : 5V
- Low power consumption: 1.5mA (sleep mode)
- Operation temperature: -40°C to +85 °
SKU: n/a - Arduino, Arduino Components, Modules, Power, Relays, Sensors
W1209WK LED Digital Thermostat Temperature Control
Arduino, Arduino Components, Modules, Power, Relays, SensorsW1209WK LED Digital Thermostat Temperature Control
- Digital Thermostat
- Temperature Control Module can be used to control the temperature of anything (Solid or Liquid)
- Set the Specific Temperature You Want to Maintain.
- Module operates on 12v DC
- You can control DC or AC Appliances
- Used for Incubation
SKU: n/a - Arduino, Arduino Components, Modules
DS1307 AT24C32 Real Time Clock module with EEPROM
- DS1307 Real Time Clock
- AT24C32 32K EEPROM
- Works with LIR2032 3.6v or CR2032 3.0v Battery (Not Included)
- The module comes fully assembled
- The DS1307 is accessed via the I2C protocol.
- Two wire I2C interface.
- Hour:Minutes : Seconds AM/PM.
- Day Month, Date – Year.
- DS1307 based RTC
- 1Hz output pin.
- 56 Bytes of Non-volatile memory available to user.
- Size:2.9cm x 2.6cm – 1.14inch x 1.02inch.
SKU: n/a - Arduino, Arduino Components, Components, Input, Modules
TTP224 4 Channel Digital Capacitive Touch Module
Arduino, Arduino Components, Components, Input, ModulesTTP224 4 Channel Digital Capacitive Touch Module
- Onboard TTP224 campacitive 4 key touch induction IC.
- Onboard the 4 way level indicator.
- Operating voltage:2.4V-5.5V.
- Module can set the output mode,output longest time,and fast/low power selection.
- PCB board size:35(mm)×29(mm).
Modes
- Toggle Mode
- Latch Mode
- Single Mode
SKU: n/a - 2.4 Ghz, Bluetooth, Modules, Wireless
Universal Bluetooth Audio Receiver Kit for Sound System & Car
- Bluetooth Version: 4.1
- Frequency Range : 2.4GHz
- Profile: A2DP
- Transmission Range: Up to 10m / 33ft
- I/O 3.5mm female plug, Micro USB female port
- Power Supply: DC 5V (Micro USB)
- Charge Time: About 30 min
- Working Time: About 4h
SKU: n/a - Arduino Components, Modules, Power, Tools
Digital Panel Voltmeter 0.36 LED Display 2.5-30V DC
- Type : 0.36 two-wire DC voltmeter
- Material: Plastic
- Size: 3.5 x 1.5 x 1cm
- Color: Black
- Display Color: Red
- Two-wire Measurement range: DC 2.5~32V
- Working Current:< 23mA
- Working Temperature: -10C-65C
- Minimum input voltage: DC 2.5V
- Maxmum input voltage: DC 32V
SKU: n/a - Modules, Power, Relays
XH-M604 Charge Controller Protection Module With LED Display
XH-M604 is a Charging Control Module 12-24V with Protection from Overcharging
- XH-M604 is ideal solution for Solar Panel & Battery
- Connect your Solar Panel or Charger on In+ & In-
- Connect Battery on BAT+ & BAT- (Lithium or Lead Acid)
- This Module protects your battery from Overcharging & Overheating
- It will extend the life of your battery
- Input Voltage:DC 6-60V
- Current: 30A
- Display Accuracy:0.1V
- Control Accuracy:0.1V
- Output Type:direct output
- Voltage Tolerance:±0.1V
- Apply For:6-60V MAX 80V battery
- Dimension:81*54*18mm
SKU: n/a - Arduino, Arduino Components, Modules
Openlog Serial to Micro SD Data Logger Module
Log & Store Serial Interface data to MicroSD card of upto 64GB, Compatible with all Microcontrollers & Serial capable devices.
- VCC Input: 3.3V-12V (Recommended 3.3V-5V)
- Log to low-cost microSD FAT16/32 cards up to 64GB
- Simple command interface
- Configurable baud rates (up to 115200bps)
- Preprogrammed ATmega328 and bootloader
- Four SPI pogo pins
- Two LEDs indicate writing status
- 2mA idle, 6mA at maximum recording rate
- can run at least the connection for vcc, gnd, rx
SKU: n/a - Arduino, Arduino Components, Arduino Shields, Modules
A4988 3D Printer Stepper Motor Driver Module
- Crossover-current protection
- Thermal shutdown circuitry
- 3.3 and 5 V compatible logic supply
- Thermal shutdown circuitry
- Ground Fault Circuit
- Load short-circuit protection
- Of five optional step mode: full, 1/2, 1/4, 1/8 and 1/16
SKU: n/a - 433 Mhz, Modules, Wireless
NRF905 Wireless Transceiver Module 433 868 915 MHz
- NRF905 work band: 433/868/915MHz
- Channel number: 170
- Function: transmitter / receiver
- Frequency stabilization method: PLL
- Modulation mode: the FSK / GMSK
- Maximum output power: +10 dBm
- Sensitivity:-100dBm
- Maximum operating rate: 76.8Kbit / s
- Working voltage :2.7 – 3.3V
SKU: n/a - 433 Mhz, Arduino, Arduino Components, Modules, Wireless
SI4432 433mhz Wireless Transceiver Module
- Operating Frequency: 240Mhz – 930Mhz (customizable)
- Operating Voltage: 1.8V to 3.6V
- Current – Sleep mode : 1.0uA
- Current – Standby mode : 800nA
- Current – Receive mode : 18.5mA
- Current – Transmit mode @ +20dBm : 85mA
- Opeting Temperature: -20C to +70C
- Data rate – Maximum : 256kbps
- Transmit power : +20 dBm (Max)
- Receiver Sensetivity : -121dBm
- Range : upto 1.5km (depends upon several other parameters, hence not gauranteed)
- Module Header pin pitch: 0.05inch / 1.27mm
SKU: n/a - Arduino, Arduino Components, Modules, Sensors
SW520D Tilt Sensor Module Module
- Using high-sensitivity switch SW 520D as the sensor.
- The module is equipped with fixed bolt hole for convenient installation.
- Using LM393 wide voltage comparator,clean signal,good waveform,strong driving ability with output of more than 15 mA.
- The working voltage of 3.3V to 5V.
- Small PCB size:3.2cm x 1.4cm.
- Digital output form: digital switch output (0 and 1).
SKU: n/a - Components, Modules
DW-CT14+ 3W Digital Bluetooth Audio Amplifier Sound Card Module
- Operating Voltage: 3.7-5V DC
- Can be Operated on 3.7V LiPo Battery or Micro USB
- Stereo Output
- This Module can act as a Sound Card when it is pluged to the computer or Laptop. (No need to connect AUX)
- Receives Audio from Bluetooth Connected Devices with 10M Range
- Modify your existing Speakers & Amplifiers & Enjoy Music over Bluetooth
- Battery & Speaker Cables Included
- Size: 40 * 20mm
- Power: 3 W
SKU: n/a - Modules, Power, Relays
Automatic Light On Off Body Motion Microwave Sensor Switch 220V
- This Switch can be used to Automatically Turn ON & OFF Light, Incandescent & CFL Based on Motion Detection.
- For example It will turn on the lights when there is Human Motion detected in the room.
- It will automatically turn off the lights after specific time when motion is not detected.
- Power Saving & Energy Efficient Device
SKU: n/a - 433 Mhz, Arduino, Arduino Components, Modules, Wireless
RX470 433Mhz Superheterodyne RF Receiver Module
433 Mhz, Arduino, Arduino Components, Modules, WirelessRX470 433Mhz Superheterodyne RF Receiver Module
- Product Model: RX470B-V02
- Superheterodyne Wireless Receiver Module
- Receiving UHF ASK Demodulators
- Support ASK and OOK Modulation.
- The receiver module has high sensitivity (-108dBm),
- Low-power performance, along with high dynamic range (greater than 60dB)
SKU: n/a
