Modules
Showing 1–24 of 172 resultsSorted by popularity
- Arduino, Arduino Components, Modules, Power, Relays, Sensors
W1209 LED Digital Thermostat Temperature Control
Arduino, Arduino Components, Modules, Power, Relays, SensorsW1209 LED Digital Thermostat Temperature Control
- This is Universal Digital Thermostat
- Temperature Control Module can be used to control the temperature of anything (Solid or Liquid or Air)
- Set the Specific Temperature You Want to Maintain.
- Module operates on 12v DC
- You can control DC or AC Appliances
- Recommended for Incubation
SKU: n/a - Modules, Power, Voltage Converters
TP4056 03962A Lithium Battery Charger with Protection Module
- Current- 1A adjustable.
- Charge precision- 1.5%.
- Input voltage- 4.5V-5.5V.
- Full charge voltage- 4.2V.
- Led indicator- red is charging Green is full charged.
- Input interface- micro USB & welding points
- Work temperature- -10° to +85°.
- Reverse polarity protection: No
- Size- small to 25X19X10mm.
- works with all types of lipo & lithium batteries like 18650
- Connect Battery with B+ & B-
- Connect Battery load OUT+ & OUT – (this is uninterrupted power supply)
SKU: n/a - Components, Modules
PAM8610 Digital Amplifier Board 15W x 2
- 2 * 15W D Class
- Supply voltage: DC 7V-15V
- Output power: 10w + 10w (8 load)
- Efficiency: 90%
- Shutdown Current: 4uA
- Quiescent current; 20mA
- SNR: 86%
- Total harmonic distortion: 5W / 1KHz / 8 —- 0.1%
- Frequency range: 20Hz-20KHz
- Input impedance: 15K
- Output Impedance: 4-8
- Amplifier board size: 30mm * 25mm * 2.5mm
SKU: n/a - Components, Modules
TPA3116D2 Digital HIFI Power Amplifier Board 2 X 120W
- Input Voltage 5-28V (more than 28V overvoltage protection)
- Support for low power 5V such as USB power supply
- Can also support high power 28V such as dual battery power supply
- Recommended power supply DC24V peak current 6A
- Output Maximum Power Up to 120W per channel
- Support 4 -8 Ohm speaker
SKU: n/a - Modules, Power, Voltage Converters
XL6009 DC-DC Boost Step Up Module
- Input Range: 3V to 32V
- Output Range: 5V ~ 35V Adjustable with onboard Potentiometer
- Input Current: 4A Max
- Conversion Efficiency: <94%
- Switching Frequency: 400KHz
- Output Ripple: 50mV (the higher the voltage, the greater the current, the greater the ripple)
- Operating Temperature: -40 ° ~ +85 °
- Dimensions: 43mm * 21mm * 14mm (L * W * H)
SKU: n/a - Components, Modules, Programmer Accessories, Wires and Cables
USB to RS485 TTL Serial Converter Adapter
Components, Modules, Programmer Accessories, Wires and CablesUSB to RS485 TTL Serial Converter Adapter
- USB to RS485 Converter Adapter
- No need External Power, Powered by USB port
- Fully Compliant USB 2.0 Standard , Backward Compatible With USB 1.1
- Support System: Windows, Linux, MAC
- Supports Baud Rate Range : 75bps – 115200bps , up to 6Mbps
- Communication Distance :1200m(max)
SKU: n/a - Components, Modules, Programmer Accessories, Wires and Cables
RS232 Serial COM Convert USB 2.0 to 9-Pin DB9 Male Adapter
Components, Modules, Programmer Accessories, Wires and CablesRS232 Serial COM Convert USB 2.0 to 9-Pin DB9 Male Adapter
- USB to RS232 Converters DB9 Male (Adapter)
- Chipset: CH340G
- Uses:
- Dish Receiver Software Upgrade
- Other DB9 Supported Devices Firmware Update
- GPS/Navigation USB Interface
- Point-of-Sale (POS) Terminals/Printers
- USB Modem/Wireless/Zigbee USB Interface
- USB Specification revision 1.1&2.0 compliant
- Support RS232 Serial Interface (both DB25 and DB9)
- Support Over 1Mbps Data Transfer Rate
- Support Remote Wake-Up and Power Management
- Support Windows MAC & Linux
SKU: n/a - Inverters, Modules, Power
EGS002 EG8010 + IR2113 Pure Sine Wave Inverter SPWM Module
- 5V single power supply
- 4 pin set of pure sine wave output frequency:
- 50Hz pure sine wave of fixed frequency of 60Hz pure sine wave of fixed frequency 0-100Hz
- pure sine wave frequency adjustable 0-400Hz pure sine wave frequency adjustable
- Unipolar and bipolar modulation
- 300nS dead time 500nS dead time 1.0uS dead time 1.5uS dead time
- External 12MHz crystal oscillator
- PWM carrier frequency 23.4KHz
- Voltage, current, real time temperature feedback
- Overvoltage, undervoltage, overcurrent and overheating protection
- Soft-start mode pin setting the response time of 1S
- Serial communication to set the output voltage, frequency and other parameters
- External Serial LCD Module 1602 displays the inverter
- voltage, frequency, temperature and current information
SKU: n/a - Arduino, Arduino Components, Modules, Programmers
USB to Serial TTL Converter CP2102
- This is a USB 2.0 to TTL UART 6PIN CP2102 Module Serial Converter.
- Designed to be used for USB to TTL
- Built-in USB to RS232 Transfer chip.
- USB specification 2.0 compliant with full-speed 12Mbps.
- Standard USB type A male and TTL 6pin connector. 6pins for 3.3V, RST, TXD, RXD, GND & +5V.
- Event character support Line break transmission.
- USB suspend states supported via SUSPEND pins.
- Temperature Range: -40degree to +85degree.
SKU: n/a - Arduino Components, Modules, Power, Relays, Robotics
LED Display Automatic Cycle Delay Timer Control Relay
Arduino Components, Modules, Power, Relays, RoboticsLED Display Automatic Cycle Delay Timer Control Relay
- Operating voltage: 6–30V
- Support MicroUSB 5.0V Power Supply
- Trigger Source: Active-high (3.0V-24V), have optocoupler isolation, can improve the system’s anti-jamming capability (customers can also shorting common ground).
- Output capability: You can control the DC 30VDC 5A or 220VAC 5A device.
- Quiescent Current: 20mA; Operating Current: 50mA
- Life: more than 10 million times; Working temperature: -40-85 ; Size:
- With Optocoupler isolation, enhanced anti-jamming capability, industrial grade board.
SKU: n/a - 433 Mhz, Arduino, Arduino Components, Modules, Wireless
433Mhz RF Receiver Learning Code Decoder Module
433 Mhz, Arduino, Arduino Components, Modules, Wireless433Mhz RF Receiver Learning Code Decoder Module
- Button usage (set the mode and starts pairing process):
- Press the button 8 times to clear previously stored codes
- Then press again onece, twice, or three time according to your configuration
- Press once: Inching mode (Momentary Mode)
- Press twice: self-Lock Mode (Toggle-Mode of the 4 Channels)
- Press three times: interlocked mode (selected channel active and be cleared, if another channel becomes active)
SKU: n/a - Modules, Power, Voltage Converters
LM2596 LM2596S DC-DC Converter Step-Down Module
- Module property:Non-isolation buck
- Rectification mode:Non-synchronous rectifier
- Input voltage:3V-40V
- Output voltage:1.3V-35V
- Output current:Rated current is 2A,maximum 3A(Additional heatsink is required)
- Conversion efficiency:92%( highest )
- Switching frequency:65KHz
- Output ripple:30mV( maximum )
- Load regulation:±0.5%
- Voltage regulation:± 2.5%
- Work temperature:-Minus 40 degrees – 85 degrees
- dimension:43mm*21mm*14mm(L*W*G)
SKU: n/a - Arduino, Arduino Components, Modules, Sensors, Wireless
GY-NEO6MV2 GPS Module RS232 TTL Output
- Voltage: 3.3 V-5 V
- Size: 36mm * 24mm
- Baud-rate default: 9600bps
- Preconfigured: Just give it power & it will start transmitting GPS data on tx pin
- Compatible with Arduino PIC AVR etc
- Export & view on Google Maps
SKU: n/a - 433 Mhz, Arduino, Arduino Components, Modules, Power, Relays, Wireless
1 Channel Wireless 433Mhz Remote Control Relay Module 12V
433 Mhz, Arduino, Arduino Components, Modules, Power, Relays, Wireless1 Channel Wireless 433Mhz Remote Control Relay Module 12V
- Input Voltage: DC 12V
- Operating Voltage: 1 – 250 V
- RF Frequency: 433MHZ
- RF Working mode:Super heterodyne receiver
- Receiver Sensitivity: -107dBm
- Remote Control Distance: >100 meter(In open environment)
- Remote Control sold separately
- works with 433 mhz remote control with encoding type ev1527 pt2262 etc
- Decoding Way: MCU Software decoding
- Can store the number of remote control:32
SKU: n/a

WINBOND W25Q32 Flash Memory Chip 32Mbit 4MB
SOP8 SSOP8 TSSOP8 SMD to DIP8 PCB for Programmer
SOIC8 SOP8 to DIP8 Socket Adapter 200mil Wide Body
PLCC32 to DIP32 IC Adapter Socket Converter
DB9 9 Pin Female 2 Rows Solder Type Plug
XL6009 DC-DC Boost Step Up Module
AC 220 v 2000 Watts Dimmer














