Development Boards
Showing 121–144 of 146 resultsSorted by popularity
- Arduino, Arduino Components, Display, Modules, Robotics
2002 20×2 Character LCD Display Module Blue Backlight
Arduino, Arduino Components, Display, Modules, Robotics2002 20×2 Character LCD Display Module Blue Backlight
- Interface: I2c
- I2C Address: 0x20
- Back lit (Blue with White Character Color)
- Fully Assembled and Tested Serial LCD 20×4 Module
- Display Format: 20 Characters x 4 lines
- Supply voltage: 5V
- The module can be easily interfaced with a MCU
- The module is a low-power consumption character LCD Module with a built-in controller
- Size: approx. 116x37X13mm
SKU: n/a - Arduino, Arduino Components
51 MCU Minimum System Development Board
- Crystal 11.0592 Mhz
- Supported Microcontroller: STC89c52 STC12C5A60S2 STC11/10x series, AT89S52 & All other pins compatible MCUs.
- 5v Power in socket
- a power switch
- 2-way expansion pins of VCC & GND
- built in all parts, compact size full features.
- Board Size: 6.5cm x 3.1cm
SKU: n/a - Arduino, Arduino Components, GSM, Modules, Wireless
M590E GPRS GSM Module Dual Band
- Ready to use module
- Chip: M590E
- Voltage: 5v
- Best for SMS GPRS
- Support networks: GSM 900 & GSM 1800 Network
- Module size: 50mm*50mm
- TTL serial port for serial port, you can link directly to the microcontroller. No need MAX232
- Power module automatically boot on home network
- Onboard status LED.
SKU: n/a - 2.4 Ghz, Arduino, Arduino Components, Modules, Wireless
ESP8285 ESP-M3 Wifi Serial Transceiver Module
2.4 Ghz, Arduino, Arduino Components, Modules, WirelessESP8285 ESP-M3 Wifi Serial Transceiver Module
Features:
- Breadboard Friendly
- Built-in Tensilica L106 ultra-low power 32-bit microprocessor, clocked at 80MHz and 160MHz support RTOS
- Built-in TCP / IP protocol stack
- Built-in 1-channel 10-bit high-precision ADC
- Peripheral Interface HSPI, UART, I2C, I2S, IR Remote Control, PWM, GPIO
- The deep sleep hold current is 10uA and the shutdown current is less than 5uA
- Wake up within 2 ms, connect and pass the packet
- Standby power consumption less than 1.0mW (DTIM3)
- Built-in 1M bytes of SPI Flash
SKU: n/a - 2.4 Ghz, Arduino, Arduino Components, Development Boards, Espressif, Modules, Wireless
ESP-201 ESP8266-201 Wifi Transceiver Module
2.4 Ghz, Arduino, Arduino Components, Development Boards, Espressif, Modules, WirelessESP-201 ESP8266-201 Wifi Transceiver Module
- ESP8266 – 201 WIFI Wireless Transceiver Module
- Compatible with Arduino IDE & NodeMCU
- Condition: New
- Can be used as the IO module
- All IO lead out
- With antenna, farther than others
- IPX interface on board
- Low power consumption
SKU: n/a - Arduino, Arduino Components, Modules, Sensors
Infrared Reflective Obstacle Tracking Sensor TCRT5000
- Sensor module output port OUT can be directly connected with the microcontroller IO port.
- Can also directly drive a 5V relay; Connection: VCC-VCC; GND-GND; OUT-IO
- The Comparator with LM393, Stable.
- Can be used 3.3V-5V DC power supply module. When the power is turned on, the red power indicator light;
- VCC external 3.3V-5V voltage (can be directly connected with the 5v microcontroller or 3.3v single-chip)
- GND external GND
- OUT small board digital output interface (0 and 1)
SKU: n/a - Arduino Components, Modules, Power, Tools
Mini Digital Panel Volt & Ampere Meter 100V 100A
- Feature:Reverse Connect Protection
- Shunt Included
- Working current of Meter itself:≤20mA
- Voltage Measuring Range: DC 0-100V
- Current Measuring Range: 0 – 100A
- Voltage resolution (V): 0.1V
- Current resolution (A): 0.01A
SKU: n/a - Arduino, Arduino Components, Connectors, GSM, Wireless
IPEX SMA Connector Antenna for GSM & GPRS Modules
Arduino, Arduino Components, Connectors, GSM, WirelessIPEX SMA Connector Antenna for GSM & GPRS Modules
- Antenna Gain 3 Dbi
- Antenna Connection IPEX & SMA
- Connectors SMA-Male & SMA-Female
- Ideal for customized GSM projects
- Excellent reception compared to ordinary pcb antenna.
- Compatible with all GSm Modules including SIM800, SIM900 etc
- Supports Global Quad Band
SKU: n/a - Arduino, Arduino Components, Components, Input, Modules
TTP229 16 Channel Digital Capacitive Touch Module
Arduino, Arduino Components, Components, Input, ModulesTTP229 16 Channel Digital Capacitive Touch Module
- Onboard TTP229 campacitive 16 key touch induction IC.
- Onboard Power led
- Onboard SCL/SDA GND & VCC & 8pins Output
- Digital IO Output
- Operating voltage:2.4V-5.5V.
- Module can set the output mode,output longest time,and fast/low power selection.
- PCB Board dimensions: 49 (mm) x64.5 (mm)
Modes:
- Toggle Mode
- Latch Mode
- Single Mode
SKU: n/a - 2.4 Ghz, Arduino, Arduino Components, Modules, Wireless
AT-09 4.0 Bluetooth Module CC2540 CC2541
- Ultra-low standby power consumption 90uA ~ 400uA
- Super-long connection distance of 100 feet / 60 meters
- ultra-fast reaction rate of 0.4 seconds
- Andrews, Apple, PC, MAC all-purpose.
- send and receive no byte limit, up to 3K Bytes / second
- do not need to do MFI
- IOS system perfect support.
- Android 4.3 system perfect support.
SKU: n/a

DC 12V High Torque Geared Reduction Motor
NodeMCU V3 ESP8266 with 32Mbit flash with CH340G
















