- ×
EV1527 HS1527 SOP8 OTP Encoder CHIP1 × ₨100 - ×
ESP8266 12E Wifi Module1 × ₨900
Subtotal: ₨1,000
Development Boards
Showing 97–120 of 146 resultsSorted by popularity
- Arduino, Arduino Components, Modules, Sensors
DS1302 RTC Real Time Clock Module
- DS1302 Real Time Clock Module
- Serial I/O interface for minimum pin count
- Wide Working Voltage: 2.0 ~ 5.5 V
- Single – byte and multi – byte transmission for clock or RAM data read/write
- TTL – compatible (Vcc) = 5 v
- Working Temperature: 0 to + 70 Deg C
- 32.768 KHz crystal oscillator
- Overall Size: Approx. 44 x 23 x 11 mm
SKU: n/a - Arduino, Arduino Components, Arduino Shields, Modules
3D Printer Engraving Machine A4988 Drive Extension CNC Shield For Arduino
Arduino, Arduino Components, Arduino Shields, Modules3D Printer Engraving Machine A4988 Drive Extension CNC Shield For Arduino
- This expansion board as a driver expansion board, can be used for engraving machines, 3D printers.
- It is a total of four slots, can drive four A4988 Stepper Motor.
- Each road Stepper Motors only need two IO ports.
- In other words, six IO ports can be well managed three stepper motors.
- Very Convenient to use.
SKU: n/a - Arduino, Arduino Components, Display, Modules, Robotics
2004 20×4 Character LCD Display Module
- Interface: I2c
- I2C Address: 0x20
- Back lit (Green with Black Character Color) (Blue with White Character Color)
- Fully Assembled and Tested Serial LCD 20×4 Module
- Display Format: 20 Characters x 4 lines
- Supply voltage: 5V
- The module can be easily interfaced with a MCU
- The module is a low-power consumption character LCD Module with a built-in controller
- Size: approx. 9.8cm x 6cm x 1.2cm
SKU: n/a - Arduino, Arduino Components, Modules, Power, Relays
12V 30A 1-Channel Relay Module SLA-12VDC-SL-C
- 12V 30A 1-Channel Relay Module with Optocoupler H/L Level Triger for Arduino
- 30A relay module, normally open interface maximum load: AC 250V/30A, DV 30V/30A;
- Optical coupling isolation, driving ability is strong, stable performance;Trigger current is 5mA;
- Module can be set high level or low level trigger by the jumper;
- Power indicator light (green), relay status indicator light (red);
- Module Size:50mm*33mm*24mm;
SKU: n/a - Arduino, Arduino Boards, Development Boards, Modules
Arduino MEGA2560 With CH340G
- Microcontroller Atmega2560
- Serial Controller CH340 / Ch340G
- Operating Voltage 5V
- Input Voltage (recommended) 7-12V
- Input Voltage (limits) 6-20V
- Digital I/O Pins 54 (of which 15 provide PWM Output)
- Analog Input Pins 16
- DC Current per I/O Pin 40 mA
- DC Current for 3.3V Pin 50 mA
- Flash Memory 256 KB of which 8 KB used by Bootloader
- SRAM 8 KB
- EEPROM 4 KB
SKU: n/a - Arduino, Arduino Components
51 MCU Minimum System Development Programming Board
- Support chips: ATmega16/ATmega32 and chip which pin-compatible.
- 32 I/O pin all the leads.
- Classic ATmega16/32 minimum system, eliminating the hassle of soldering.
- Crystal: The socket hole welding facilitate the buyer to replace the crystal, 8M crystal.
- Power supply: power adapter or external expansion pin power supply (not support ISP download interface power supply)
- DC-005 Power Block (supporting the transposon is 5.5*2.1mm).
- Expand outside 4 channel VCC, GND.
- Reset: Power-on reset and reset button.
- Power LED (D1) and the program run indicator (D2).
- Standard ISP download interface.
SKU: n/a - Arduino, Arduino Components, Power, Relays
1 Channel 5v Optically Isolated Relay Module
- Operating Voltage: 5v DC
- Relay contact capacity: 250v AC 10A, or 30v DC 10A
- Optically Isolated from Mains
- Relay output: normally open, normally closed
- Low level Trigger
- signal input voltage range: 0-5 v
- Compatible with Arduino, PIC, AVR etc
SKU: n/a - Arduino, Arduino Components, Modules, Sensors
KY-026 IR Flame Sensor Fire Detection Module
- High sensitivity IR receiver
- Extremely sensitive to wave between 760-1100nm
- Power supply indicator lamp
- Comparator output indicator lamp
- AO, real-time thermister voltage signal output
- DO, high / low electric level signal output
- Analog quantity output
- Threshold rollover electric level output
- Threshold adjusted by potentiometer
- Detection Angle Range: About 60 degrees
- Power Supply: 0-15 V DC
- Hole Inner Diameter: Approx. 3mm
- Size (L x W): Approx. 36 x 16mm
SKU: n/a - Arduino, Arduino Components, Modules, Sensors
GY-291 ADXL345 Digital 3 Axis Digital Gravity Sensor
- GY-291 ADXL345 Digital 3 Axis Digital Gravity Sensor Module for Arduino & PIC
- ADXL345 is well suited for mobile device applications. It can tilt sensing applications
- Measures the static acceleration of gravity, you can measure motion or shock resulting from moving
- State acceleration. Its high resolution (3.9mg / LSB), capable of measuring less than 1.0 °
- Tilt angle change.
SKU: n/a - Arduino, Arduino Components, Input, Modules, Sensors
Reed Magnetic Sensor Module
- Normally Open Reed
- The comparator output signals clean, good waveform, driving ability, 15mA.
- The working voltage of 3.3V-5V
- The output form: digital switching output (0 and 1)
- A fixed bolt hole for easy installation
- Small PCB board size: 3.2cm x 1.4cm
- Using a wide voltage comparator LM393
SKU: n/a - Arduino, Arduino Components, Sensors
DHT11 Temperature & Humidity Sensor
- DHT Series Digital Temperature and Humidity Sensor
- Full scale calibration, digital output
- Humidity Measurement Range: 20% to 9 0%RH (0-50 ° C temperature compensation)
- Temperature Measurement Range: 0 to +50 ° C
- Humidity Measurement Accuracy: Measurement Accuracy of ± 5.0% RH Temperature: ± 2 ° C
- Response time: <5 seconds
- Ultra Low Power Consumption
SKU: n/a - 2.4 Ghz, Arduino, Arduino Components, Espressif, Modules, Wireless
ESP8266 07 Wifi Module
- Improve the peripheral circuit
- Enhanced impedance matching
- Signal output is better, whether it is stable or anti jamming ability
- IPEX Connector For External Antenna
- PCB antenna after professional laboratory testing, perfect matching, after ROHS certification, have been greatly improved!
- The enhanced version is fully compatible with the firmware before the ESP-12, based on the SPI and the new six IO port
- Development is more convenient, more widely used!
- Node MCU Compatible
- Arduino IDE Compatible
SKU: n/a - Arduino, Arduino Components, Display, Modules, Robotics
2002 20×2 Character LCD Display Module Blue Backlight
Arduino, Arduino Components, Display, Modules, Robotics2002 20×2 Character LCD Display Module Blue Backlight
- Interface: I2c
- I2C Address: 0x20
- Back lit (Blue with White Character Color)
- Fully Assembled and Tested Serial LCD 20×4 Module
- Display Format: 20 Characters x 4 lines
- Supply voltage: 5V
- The module can be easily interfaced with a MCU
- The module is a low-power consumption character LCD Module with a built-in controller
- Size: approx. 116x37X13mm
SKU: n/a - Arduino, Arduino Components
51 MCU Minimum System Development Board
- Crystal 11.0592 Mhz
- Supported Microcontroller: STC89c52 STC12C5A60S2 STC11/10x series, AT89S52 & All other pins compatible MCUs.
- 5v Power in socket
- a power switch
- 2-way expansion pins of VCC & GND
- built in all parts, compact size full features.
- Board Size: 6.5cm x 3.1cm
SKU: n/a
