Development Boards
Showing 49–72 of 146 resultsSorted by popularity
- 433 Mhz, Arduino, Arduino Components, Wireless
433Mhz RF Wireless Remote Control One Key
- Working voltage: DC 12V (built-in button battery)
- Compatible with Arduino & 433mhz receiver
- Operating Current: 10MA
- Transmitting frequency: 433Mhz
- Key number: 1 Key
- Emission Distance: 20-70m (Open area)
- Encoding type: fixed code (1527,1538)
- Oscillation resistance: 4.7m/15.42ft (Approx.)
- Size: (Dia×H) 4.5×1cm/1.77×0.39in (Approx.)
- Color: White
- Case material: Plastic
SKU: n/a - 433 Mhz, Arduino, Arduino Components, Wireless
433Mhz Wireless Remote Control 4 Channel Black
- Clone your existing 433mhz Remote Control Key FOB
- Working voltage: DC 12V (built-in button battery)
- Compatible with Arduino & 433mhz receiver
- Operating Current: <25ma
- Transmitting frequency: 433Mhz
- Key number: 4 Key (4 Channel)
- Emission Distance: 70-100m (Open area)
- Encoding type: fixed code (1527)
- Color: Black
- Case material: Metal and PVC
SKU: n/a - Arduino, Arduino Components, Modules, Sensors
SW-420 Normally Closed Vibration Sensor Module
- The company produced normally closed type vibration sensor SW-420
- The comparator output, signal clean, good waveform, driving ability is strong, for more than 15 ma
- The working voltage of 3.3V to 5V
- Output form: digital switch output (0 and 1)
- Has a fixed bolt hole, convenient installation
- Small board PCB size: 3.2cm x 1.4cm
- Use the LM393 wide voltage comparator
SKU: n/a - Arduino, Arduino Components, GSM, Modules, Wireless
SIM900A GPRS GSM Module
- Chip: SIM900A by SIMCOM
- Dual-Band 900/ 1800 MHz
- GPRS multi-slot class 10/8GPRS mobile station class B
- Compliant to GSM phase 2/2+
- Dimensions: 24*24*3 mm
- Weight: 3.4g
- Control via AT commands (GSM 07.07 ,07.05 and SIMCOM enhanced AT Commands)
- Supply voltage range : 5V
- Low power consumption: 1.5mA (sleep mode)
- Operation temperature: -40°C to +85 °
SKU: n/a - Arduino, Arduino Components, Arduino Shields, Modules
A4988 3D Printer Stepper Motor Driver Module
- Crossover-current protection
- Thermal shutdown circuitry
- 3.3 and 5 V compatible logic supply
- Thermal shutdown circuitry
- Ground Fault Circuit
- Load short-circuit protection
- Of five optional step mode: full, 1/2, 1/4, 1/8 and 1/16
SKU: n/a - Arduino, Arduino Components, Modules, Power, Relays, Sensors
W1209WK LED Digital Thermostat Temperature Control
Arduino, Arduino Components, Modules, Power, Relays, SensorsW1209WK LED Digital Thermostat Temperature Control
- Digital Thermostat
- Temperature Control Module can be used to control the temperature of anything (Solid or Liquid)
- Set the Specific Temperature You Want to Maintain.
- Module operates on 12v DC
- You can control DC or AC Appliances
- Used for Incubation
SKU: n/a - Arduino, Arduino Components, Modules
DS1307 AT24C32 Real Time Clock module with EEPROM
- DS1307 Real Time Clock
- AT24C32 32K EEPROM
- Works with LIR2032 3.6v or CR2032 3.0v Battery (Not Included)
- The module comes fully assembled
- The DS1307 is accessed via the I2C protocol.
- Two wire I2C interface.
- Hour:Minutes : Seconds AM/PM.
- Day Month, Date – Year.
- DS1307 based RTC
- 1Hz output pin.
- 56 Bytes of Non-volatile memory available to user.
- Size:2.9cm x 2.6cm – 1.14inch x 1.02inch.
SKU: n/a - Arduino, Arduino Boards, Arduino Components, Development Boards
Atmel ATMEGA328P-PU Microcontroller DIP28 Package
Arduino, Arduino Boards, Arduino Components, Development BoardsAtmel ATMEGA328P-PU Microcontroller DIP28 Package
- The Atmel® picoPower® ATmega328/P is a low-power CMOS 8-bit microcontroller based on the AVR® enhanced RISC architecture.
- By executing powerful instructions in a single clock cycle, the ATmega328/P achieves throughputs close to 1MIPS per MHz.
- This empowers system designer to optimize the device for power consumption versus processing speed.
- ATMEGA328P in DIP28
SKU: n/a - Arduino, Arduino Components, Components, Input, Modules
TTP224 4 Channel Digital Capacitive Touch Module
Arduino, Arduino Components, Components, Input, ModulesTTP224 4 Channel Digital Capacitive Touch Module
- Onboard TTP224 campacitive 4 key touch induction IC.
- Onboard the 4 way level indicator.
- Operating voltage:2.4V-5.5V.
- Module can set the output mode,output longest time,and fast/low power selection.
- PCB board size:35(mm)×29(mm).
Modes
- Toggle Mode
- Latch Mode
- Single Mode
SKU: n/a - Arduino, Arduino Components, RFID, Wireless
125Khz RFID Tag Keychain
- Big coil, ABS material
- Strong magnetic induction
- 100% brand new and high quality
- Operation frequency: 125Khz
- Each token pre-programmed with unique ID which is printed on it
- Each comes with Key ring included
- Compatible with all RFID reader to gain access
- Card read distance: 0-10 centimetres
- Water resistant
SKU: n/a - Arduino, Arduino Components, Modules
Openlog Serial to Micro SD Data Logger Module
Log & Store Serial Interface data to MicroSD card of upto 64GB, Compatible with all Microcontrollers & Serial capable devices.
- VCC Input: 3.3V-12V (Recommended 3.3V-5V)
- Log to low-cost microSD FAT16/32 cards up to 64GB
- Simple command interface
- Configurable baud rates (up to 115200bps)
- Preprogrammed ATmega328 and bootloader
- Four SPI pogo pins
- Two LEDs indicate writing status
- 2mA idle, 6mA at maximum recording rate
- can run at least the connection for vcc, gnd, rx
SKU: n/a - Arduino, Arduino Components, Sensors
Soil Moisture Detection Humidity Sensor Module
- Operating Voltage 3.3V-5V
- Module Dual Output mode , a simple digital output , analog output more accurate.
- With fixed bolt hole for easy installation
- Small PCB board size : 3cm * 1.6cm
- Power Indicator ( red ) and the digital switch output Indicator ( green )
- Using LM393 Comparator Chip , Stable
- VCC external 3.3V-5V
- GND GND External
- DO small board digital output interfaces ( 0 and 1 )
- AO small board analog output interface
SKU: n/a - Arduino, Arduino Components, Modules, Sensors
SW520D Tilt Sensor Module Module
- Using high-sensitivity switch SW 520D as the sensor.
- The module is equipped with fixed bolt hole for convenient installation.
- Using LM393 wide voltage comparator,clean signal,good waveform,strong driving ability with output of more than 15 mA.
- The working voltage of 3.3V to 5V.
- Small PCB size:3.2cm x 1.4cm.
- Digital output form: digital switch output (0 and 1).
SKU: n/a - 433 Mhz, Arduino, Arduino Components, Modules, Power, Relays, Wireless
1 Channel Wireless 433Mhz Remote Control Relay Module 220v
433 Mhz, Arduino, Arduino Components, Modules, Power, Relays, Wireless1 Channel Wireless 433Mhz Remote Control Relay Module 220v
- Input Voltage: AC85V-AC220V
- RF Frequency: 315/433MHZ
- RF Working mode:Super heterodyne receiver
- Receiver Sensitivity: -107dBm
- Remote Control Distance: >100 meter(In open environment)
- Remote Control sold seperately
- works with 433 mhz remote control with encoding type ev1527 pt2262 etc
- Decoding Way: MCU Software decoding
- Can store the number of remote control:32
- Support remote control type: Fixed code, learning code
- Channel: 1CH
SKU: n/a

2.54mm PCB Jumper Short Circuit Cap Shunts
Nokia 84x84 Graphic LCD Display Module
AC-DC 24V 2A 50W Isolated Branded Power Supply
0.9V 3V 5V to 5V 600MA USB Output Charger Module
DK112 High Performance Switch Mode Power Controller IC
SOIC8 SOP8 to DIP8 Socket Adapter 150mil Narrow Body
SW-420 Normally Closed Vibration Sensor Module

















