Arduino
Showing 97–120 of 140 resultsSorted by popularity
- Arduino, Arduino Components
51 MCU Minimum System Development Programming Board
- Support chips: ATmega16/ATmega32 and chip which pin-compatible.
- 32 I/O pin all the leads.
- Classic ATmega16/32 minimum system, eliminating the hassle of soldering.
- Crystal: The socket hole welding facilitate the buyer to replace the crystal, 8M crystal.
- Power supply: power adapter or external expansion pin power supply (not support ISP download interface power supply)
- DC-005 Power Block (supporting the transposon is 5.5*2.1mm).
- Expand outside 4 channel VCC, GND.
- Reset: Power-on reset and reset button.
- Power LED (D1) and the program run indicator (D2).
- Standard ISP download interface.
SKU: n/a - Arduino, Arduino Components, Power, Relays
1 Channel 5v Optically Isolated Relay Module
- Operating Voltage: 5v DC
- Relay contact capacity: 250v AC 10A, or 30v DC 10A
- Optically Isolated from Mains
- Relay output: normally open, normally closed
- Low level Trigger
- signal input voltage range: 0-5 v
- Compatible with Arduino, PIC, AVR etc
SKU: n/a - Arduino, Arduino Components, Modules, Sensors
KY-026 IR Flame Sensor Fire Detection Module
- High sensitivity IR receiver
- Extremely sensitive to wave between 760-1100nm
- Power supply indicator lamp
- Comparator output indicator lamp
- AO, real-time thermister voltage signal output
- DO, high / low electric level signal output
- Analog quantity output
- Threshold rollover electric level output
- Threshold adjusted by potentiometer
- Detection Angle Range: About 60 degrees
- Power Supply: 0-15 V DC
- Hole Inner Diameter: Approx. 3mm
- Size (L x W): Approx. 36 x 16mm
SKU: n/a - Arduino, Arduino Components, Modules, Sensors
GY-291 ADXL345 Digital 3 Axis Digital Gravity Sensor
- GY-291 ADXL345 Digital 3 Axis Digital Gravity Sensor Module for Arduino & PIC
- ADXL345 is well suited for mobile device applications. It can tilt sensing applications
- Measures the static acceleration of gravity, you can measure motion or shock resulting from moving
- State acceleration. Its high resolution (3.9mg / LSB), capable of measuring less than 1.0 °
- Tilt angle change.
SKU: n/a - Arduino, Arduino Components, Input, Modules, Sensors
Reed Magnetic Sensor Module
- Normally Open Reed
- The comparator output signals clean, good waveform, driving ability, 15mA.
- The working voltage of 3.3V-5V
- The output form: digital switching output (0 and 1)
- A fixed bolt hole for easy installation
- Small PCB board size: 3.2cm x 1.4cm
- Using a wide voltage comparator LM393
SKU: n/a - Arduino, Arduino Components, Sensors
DHT11 Temperature & Humidity Sensor
- DHT Series Digital Temperature and Humidity Sensor
- Full scale calibration, digital output
- Humidity Measurement Range: 20% to 9 0%RH (0-50 ° C temperature compensation)
- Temperature Measurement Range: 0 to +50 ° C
- Humidity Measurement Accuracy: Measurement Accuracy of ± 5.0% RH Temperature: ± 2 ° C
- Response time: <5 seconds
- Ultra Low Power Consumption
SKU: n/a - 2.4 Ghz, Arduino, Arduino Components, Espressif, Modules, Wireless
ESP8266 07 Wifi Module
- Improve the peripheral circuit
- Enhanced impedance matching
- Signal output is better, whether it is stable or anti jamming ability
- IPEX Connector For External Antenna
- PCB antenna after professional laboratory testing, perfect matching, after ROHS certification, have been greatly improved!
- The enhanced version is fully compatible with the firmware before the ESP-12, based on the SPI and the new six IO port
- Development is more convenient, more widely used!
- Node MCU Compatible
- Arduino IDE Compatible
SKU: n/a - Arduino, Arduino Components, Display, Modules, Robotics
2002 20×2 Character LCD Display Module Blue Backlight
Arduino, Arduino Components, Display, Modules, Robotics2002 20×2 Character LCD Display Module Blue Backlight
- Interface: I2c
- I2C Address: 0x20
- Back lit (Blue with White Character Color)
- Fully Assembled and Tested Serial LCD 20×4 Module
- Display Format: 20 Characters x 4 lines
- Supply voltage: 5V
- The module can be easily interfaced with a MCU
- The module is a low-power consumption character LCD Module with a built-in controller
- Size: approx. 116x37X13mm
SKU: n/a - Arduino, Arduino Components
51 MCU Minimum System Development Board
- Crystal 11.0592 Mhz
- Supported Microcontroller: STC89c52 STC12C5A60S2 STC11/10x series, AT89S52 & All other pins compatible MCUs.
- 5v Power in socket
- a power switch
- 2-way expansion pins of VCC & GND
- built in all parts, compact size full features.
- Board Size: 6.5cm x 3.1cm
SKU: n/a - Arduino, Arduino Components, GSM, Modules, Wireless
M590E GPRS GSM Module Dual Band
- Ready to use module
- Chip: M590E
- Voltage: 5v
- Best for SMS GPRS
- Support networks: GSM 900 & GSM 1800 Network
- Module size: 50mm*50mm
- TTL serial port for serial port, you can link directly to the microcontroller. No need MAX232
- Power module automatically boot on home network
- Onboard status LED.
SKU: n/a - 2.4 Ghz, Arduino, Arduino Components, Modules, Wireless
ESP8285 ESP-M3 Wifi Serial Transceiver Module
2.4 Ghz, Arduino, Arduino Components, Modules, WirelessESP8285 ESP-M3 Wifi Serial Transceiver Module
Features:
- Breadboard Friendly
- Built-in Tensilica L106 ultra-low power 32-bit microprocessor, clocked at 80MHz and 160MHz support RTOS
- Built-in TCP / IP protocol stack
- Built-in 1-channel 10-bit high-precision ADC
- Peripheral Interface HSPI, UART, I2C, I2S, IR Remote Control, PWM, GPIO
- The deep sleep hold current is 10uA and the shutdown current is less than 5uA
- Wake up within 2 ms, connect and pass the packet
- Standby power consumption less than 1.0mW (DTIM3)
- Built-in 1M bytes of SPI Flash
SKU: n/a - 2.4 Ghz, Arduino, Arduino Components, Development Boards, Espressif, Modules, Wireless
ESP-201 ESP8266-201 Wifi Transceiver Module
2.4 Ghz, Arduino, Arduino Components, Development Boards, Espressif, Modules, WirelessESP-201 ESP8266-201 Wifi Transceiver Module
- ESP8266 – 201 WIFI Wireless Transceiver Module
- Compatible with Arduino IDE & NodeMCU
- Condition: New
- Can be used as the IO module
- All IO lead out
- With antenna, farther than others
- IPX interface on board
- Low power consumption
SKU: n/a

Automatic Light On Off Body Motion Microwave Sensor Switch 220V
NRF905 Wireless Transceiver Module 433 868 915 MHz
1N4007 M7 1A SMD Rectifier Diode
AT30 Buck Boost Voltage Converter Module
LM317T LM317 TO-220 1.2V To 37V 1.5A Adjustable Voltage Regulator
WINBOND W25Q32 BVAIG Flash Memory Chip 32Mbit 4MB
Reed Magnetic Sensor Module


















