- ×
ESP-201 ESP8266-201 Wifi Transceiver Module1 × ₨1,100 - ×
ESP8266 12E Wifi Module1 × ₨900
Subtotal: ₨2,000
Arduino
Showing 73–96 of 140 resultsSorted by popularity
- Arduino, Arduino Components, Sensors
Soil Moisture Detection Humidity Sensor Module
- Operating Voltage 3.3V-5V
- Module Dual Output mode , a simple digital output , analog output more accurate.
- With fixed bolt hole for easy installation
- Small PCB board size : 3cm * 1.6cm
- Power Indicator ( red ) and the digital switch output Indicator ( green )
- Using LM393 Comparator Chip , Stable
- VCC external 3.3V-5V
- GND GND External
- DO small board digital output interfaces ( 0 and 1 )
- AO small board analog output interface
SKU: n/a - 433 Mhz, Arduino, Arduino Components, Wireless
433Mhz RF Wireless Remote Control 2 Channel On Off
- This remote control only support the learning code (1527) of the receiver
- It can not clone other remote controls, it is only 1527 encoded remote control. (Fixed Code)
- Can only match the 1527 learning code receiver.
- Application: (Partial)
- Garage doors access control system
- Electronic gates access control system
- Electrical appliances control
- Vehicle central locking systems
- Car sunroofs control
- Heating systems control
SKU: n/a - 433 Mhz, Arduino, Arduino Components, Modules, Power, Relays, Wireless
1 Channel Wireless 433Mhz Remote Control Relay Module 220v
433 Mhz, Arduino, Arduino Components, Modules, Power, Relays, Wireless1 Channel Wireless 433Mhz Remote Control Relay Module 220v
- Input Voltage: AC85V-AC220V
- RF Frequency: 315/433MHZ
- RF Working mode:Super heterodyne receiver
- Receiver Sensitivity: -107dBm
- Remote Control Distance: >100 meter(In open environment)
- Remote Control sold seperately
- works with 433 mhz remote control with encoding type ev1527 pt2262 etc
- Decoding Way: MCU Software decoding
- Can store the number of remote control:32
- Support remote control type: Fixed code, learning code
- Channel: 1CH
SKU: n/a - Arduino, Arduino Components, Modules, Sensors
Microphone Sensor Sound Detection Module
- Operating Voltage: 3v to 5.5v
- Sound Detection Module has two output
- AO, analog output, real-time output voltage signal of the microphone
- DO, when the sound intensity reaches a certain threshold, the output high and low signal
SKU: n/a - Arduino Components, Arduino Shields, Development Boards, Modules
HW-584 RJ45 Network Internet Relay Control Switch 5v W5100
Arduino Components, Arduino Shields, Development Boards, ModulesHW-584 RJ45 Network Internet Relay Control Switch 5v W5100
- Model: HW-584
- Channel: 8 Channel, 16Channel (Both relay boards Supported)
- External power supply voltage: 5V DC 2A
- Network assistant set serial port
- Protocol: TCP/IP
- IP: 192.168.1.4
- Port number: 3000
SKU: n/a - Arduino, Arduino Components, Modules, Power, Relays, Sensors
XH-W1219 LED Digital Thermostat Temperature Controller
Arduino, Arduino Components, Modules, Power, Relays, SensorsXH-W1219 LED Digital Thermostat Temperature Controller
- This is Universal Digital Thermostat
- Temperature Control Module can be used to control the temperature of anything (Solid or Liquid or Air)
- Set the Specific Temperature You Want to Maintain.
- Module operates on 12v DC
- You can control DC or AC Appliances
- Recommended for Incubation
SKU: n/a - Arduino, Robotics
Mini Micro 9g 1.6KG Servo SG90
- Model: SG90
- Technical data given by the manufacturers:
- Size: 21.5mmX11.8mmX22.7mm
- Weight: 9 grams
- No-load speed: 0.12 seconds / 60 degrees (4.8V)
- Stall torque of 1.2 – 1.4 kg / cm (4.8V)
- Operating temperature: -30 to +60 degrees Celsius
- Dead-set: 7 microseconds
- Operating voltage: 4.8V-6V
SKU: n/a - Arduino Components, Transistor
DS2401 Hard Coded Silicon Serial Number One Wire
- Model DS2401
- Protocol: 1 Wire
- Multiple Devices Support on Same Bus
- Protect Your Programming with Unique Serial Number.
- Extended 2.8V to 6.0V Range
- Unique, Factory-Lasered and Tested 64-Bit Registration Number (8-Bit Family Code + 48-Bit Serial Number + 8-Bit CRC Tester)
- Guaranteed No Two Parts Alike
SKU: n/a - Arduino, Arduino Components, Input, Modules, Power, Relays
2 Channel 5v Optically Isolated Relay Module
Arduino, Arduino Components, Input, Modules, Power, Relays2 Channel 5v Optically Isolated Relay Module
- Operating Voltage: 5v DC
- Relay contact capacity: 250v AC 10A, or 30v DC 10A
- Optically Isolated from Mains
- Relay output: normally open, normally closed
- Low level Trigger
- signal input voltage range: 0-5 v
- VCC is power supply to board. JD – VCC is relay power supply (Default: JD – VCC and VCC Jumper)
- Compatible with Arduino, PIC, AVR etc
SKU: n/a - 2.4 Ghz, Arduino, Arduino Components, Modules, Wireless
SPP-C Bluetooth Module
- Bluetooth V2.1 + EDR
- Bluetooth Class 2
- Built-in PCB radio frequency antenna
- Support UART interface
- 3.3V power supply
- Status indication LED: P12
- Used to indicate the status of the Bluetooth module, LED flashing mode and Bluetooth module status corresponding to the following table:
- Mode LED Displays the module status
- (800 ms-on, 800 ms-off) waiting for pairing
- Host interrupt indication: P05
- Used to indicate whether the host is interrupted or not, the connection status is high, and other states are low.
SKU: n/a - Arduino, Arduino Components, Modules, Sensors
DS1302 RTC Real Time Clock Module
- DS1302 Real Time Clock Module
- Serial I/O interface for minimum pin count
- Wide Working Voltage: 2.0 ~ 5.5 V
- Single – byte and multi – byte transmission for clock or RAM data read/write
- TTL – compatible (Vcc) = 5 v
- Working Temperature: 0 to + 70 Deg C
- 32.768 KHz crystal oscillator
- Overall Size: Approx. 44 x 23 x 11 mm
SKU: n/a - Arduino, Arduino Components, Arduino Shields, Modules
3D Printer Engraving Machine A4988 Drive Extension CNC Shield For Arduino
Arduino, Arduino Components, Arduino Shields, Modules3D Printer Engraving Machine A4988 Drive Extension CNC Shield For Arduino
- This expansion board as a driver expansion board, can be used for engraving machines, 3D printers.
- It is a total of four slots, can drive four A4988 Stepper Motor.
- Each road Stepper Motors only need two IO ports.
- In other words, six IO ports can be well managed three stepper motors.
- Very Convenient to use.
SKU: n/a - Arduino, Arduino Components, Display, Modules, Robotics
2004 20×4 Character LCD Display Module
- Interface: I2c
- I2C Address: 0x20
- Back lit (Green with Black Character Color) (Blue with White Character Color)
- Fully Assembled and Tested Serial LCD 20×4 Module
- Display Format: 20 Characters x 4 lines
- Supply voltage: 5V
- The module can be easily interfaced with a MCU
- The module is a low-power consumption character LCD Module with a built-in controller
- Size: approx. 9.8cm x 6cm x 1.2cm
SKU: n/a - Arduino, Arduino Components, Modules, Power, Relays
12V 30A 1-Channel Relay Module SLA-12VDC-SL-C
- 12V 30A 1-Channel Relay Module with Optocoupler H/L Level Triger for Arduino
- 30A relay module, normally open interface maximum load: AC 250V/30A, DV 30V/30A;
- Optical coupling isolation, driving ability is strong, stable performance;Trigger current is 5mA;
- Module can be set high level or low level trigger by the jumper;
- Power indicator light (green), relay status indicator light (red);
- Module Size:50mm*33mm*24mm;
SKU: n/a - Arduino, Arduino Boards, Development Boards, Modules
Arduino MEGA2560 With CH340G
- Microcontroller Atmega2560
- Serial Controller CH340 / Ch340G
- Operating Voltage 5V
- Input Voltage (recommended) 7-12V
- Input Voltage (limits) 6-20V
- Digital I/O Pins 54 (of which 15 provide PWM Output)
- Analog Input Pins 16
- DC Current per I/O Pin 40 mA
- DC Current for 3.3V Pin 50 mA
- Flash Memory 256 KB of which 8 KB used by Bootloader
- SRAM 8 KB
- EEPROM 4 KB
SKU: n/a
