All Products
Showing 193–216 of 444 resultsSorted by popularity
- Components, Connectors
USB 2.0 to SATA 7+22Pin Adapter Cable For 2.5 HDD SSD
- Clever design connect the 2.5″ SATA HDD/SSD to your computer via USB
- Support USB2.0 with transmission speed up to 480MB/sec, and also compatible on USB 1.0,USB Y cable supports 7200rpm HDD
- Support hot-swap, plug and play, light weight, easy to carry along
- Color: Black
- Material: Copper + ABS Shell
- Weight: 35g
SKU: n/a - Arduino, Arduino Components, Modules, Sensors
SW-420 Normally Closed Vibration Sensor Module
- The company produced normally closed type vibration sensor SW-420
- The comparator output, signal clean, good waveform, driving ability is strong, for more than 15 ma
- The working voltage of 3.3V to 5V
- Output form: digital switch output (0 and 1)
- Has a fixed bolt hole, convenient installation
- Small board PCB size: 3.2cm x 1.4cm
- Use the LM393 wide voltage comparator
SKU: n/a - Display, Input, Smart Boards
HDMI To VGA Converter With Audio
- Interface: HDMI Input, VGA Output.
- Audio Out Support
- Compliant with HDMI 1.3 standard.
- Convert the video signal from digital to analog.
- Upgrade Version, integrated with Audio output.
- Powered by HDMI, no external power adapter required.
- Plug and Play, no software is needed.
- Easy to use: install in seconds, no need of setting.
- Conversion: it can convert complete HDMI into VGA video.
- Compatible for PC / Laptop / DVD / Sky HD / for Apple TV and other HD device to be connected with VGA monitor / projector or other display.
- Color: Black,White
- Size:48/22*14mm
- Weight: 22 g
SKU: n/a - Modules, Power, Voltage Converters
XL4016 DC-DC 200W 8A Step Down Buck Converter Potentiometer
- Input voltage: DC 4-38V
- Output voltage: DC 1.25-36V
- Maximum current: 8A
- Maximum power: 200W
- Conversion efficiency: 95%
- Working Temperature: -45~+85℃
- Size: 6×3.7cm/2.36×1.46inch
- Voltage Regulating Mode: PWM Modulation
- Switching Frequency: 180KHz
SKU: n/a - Battery, Charge Controller, Modules, Power, Relays
XH-M602 Charge Controller Protection Module With LED Display
Battery, Charge Controller, Modules, Power, RelaysXH-M602 Charge Controller Protection Module With LED Display
- Input Voltage: AC 220
- Inpu Current: 220v & 10A Max (2250 Watt)
- Battery Voltage: 3.7V – 120V
- Display Accuracy:0.1V
- Control Accuracy:0.1V
- Output Type: AC Out for Charger
- Voltage Tolerance:±0.1V
SKU: n/a - Power, Tools
UNI-T UT33D+ Palm Size Digital Multimeter
- UT33 series is a palm size handheld Pocketable Digital Multimeter.
- Accuracy is the key to success of UNI-T products.
- Attractive design & reliable performance
- It measures DC/AC Voltage
- DC Current and Resistance with accuracy.
- It has an unique Data Hold function, not available in other palm size meters.
- Great value! Low cost and convenient for everyday test, & diagnose.
- Great addition in your LAB experience.
SKU: n/a - Inverters, Power
EGP1000W Pure Sine Wave Inverter PCB for EG8010
- Model: EGP1000 W
- Can be used with EG8010/ EG001 & EG002 boards
- This item is empty board without any parts soldered on it.
- heat sink and PCB need to keep a certain gap
- Compatible with EG8010 (EGS001 & EGS002) pure sine wave inverter board.
- Nice finish
- Ready for soldering
SKU: n/a - Components, Modules, Programmer Accessories, Wires and Cables
RS232 to RS485 Industrial Serial Converter Adapter
Components, Modules, Programmer Accessories, Wires and CablesRS232 to RS485 Industrial Serial Converter Adapter
- Interface RS232 DB9 Female Connector
- Compatible with EIA/TIA RS-232 & RS-485 Standard
- Work environment:-10degree to 86 degree,relative humidity:5% to 95%
- Transmission Distance: RS485 max 1200m , RS232 Side max.5m
- Transmission Rate: 300-115200bps, which is capable of applying between device & host computer.
- Dimension:5.5cm x 3.5cm x 1.8cm(LxWxH)
SKU: n/a - Arduino, Arduino Components, GSM, Modules, Wireless
SIM900A GPRS GSM Module
- Chip: SIM900A by SIMCOM
- Dual-Band 900/ 1800 MHz
- GPRS multi-slot class 10/8GPRS mobile station class B
- Compliant to GSM phase 2/2+
- Dimensions: 24*24*3 mm
- Weight: 3.4g
- Control via AT commands (GSM 07.07 ,07.05 and SIMCOM enhanced AT Commands)
- Supply voltage range : 5V
- Low power consumption: 1.5mA (sleep mode)
- Operation temperature: -40°C to +85 °
SKU: n/a - Arduino, Arduino Components, Modules, Power, Relays, Sensors
W1209WK LED Digital Thermostat Temperature Control
Arduino, Arduino Components, Modules, Power, Relays, SensorsW1209WK LED Digital Thermostat Temperature Control
- Digital Thermostat
- Temperature Control Module can be used to control the temperature of anything (Solid or Liquid)
- Set the Specific Temperature You Want to Maintain.
- Module operates on 12v DC
- You can control DC or AC Appliances
- Used for Incubation
SKU: n/a - Arduino, Arduino Components, Modules
DS1307 AT24C32 Real Time Clock module with EEPROM
- DS1307 Real Time Clock
- AT24C32 32K EEPROM
- Works with LIR2032 3.6v or CR2032 3.0v Battery (Not Included)
- The module comes fully assembled
- The DS1307 is accessed via the I2C protocol.
- Two wire I2C interface.
- Hour:Minutes : Seconds AM/PM.
- Day Month, Date – Year.
- DS1307 based RTC
- 1Hz output pin.
- 56 Bytes of Non-volatile memory available to user.
- Size:2.9cm x 2.6cm – 1.14inch x 1.02inch.
SKU: n/a - Arduino, Arduino Boards, Arduino Components, Development Boards
Atmel ATMEGA328P-PU Microcontroller DIP28 Package
Arduino, Arduino Boards, Arduino Components, Development BoardsAtmel ATMEGA328P-PU Microcontroller DIP28 Package
- The Atmel® picoPower® ATmega328/P is a low-power CMOS 8-bit microcontroller based on the AVR® enhanced RISC architecture.
- By executing powerful instructions in a single clock cycle, the ATmega328/P achieves throughputs close to 1MIPS per MHz.
- This empowers system designer to optimize the device for power consumption versus processing speed.
- ATMEGA328P in DIP28
SKU: n/a - Arduino, Arduino Components, Components, Input, Modules
TTP224 4 Channel Digital Capacitive Touch Module
Arduino, Arduino Components, Components, Input, ModulesTTP224 4 Channel Digital Capacitive Touch Module
- Onboard TTP224 campacitive 4 key touch induction IC.
- Onboard the 4 way level indicator.
- Operating voltage:2.4V-5.5V.
- Module can set the output mode,output longest time,and fast/low power selection.
- PCB board size:35(mm)×29(mm).
Modes
- Toggle Mode
- Latch Mode
- Single Mode
SKU: n/a

DS2401 Hard Coded Silicon Serial Number One Wire
GY-291 ADXL345 Digital 3 Axis Digital Gravity Sensor
PAM8406 Digital Amplifier With Volume Potentiometer 5Wx2
















