All Products
Showing 361–384 of 444 resultsSorted by popularity
- Arduino, Arduino Components, Sensors
DHT11 Temperature & Humidity Sensor
- DHT Series Digital Temperature and Humidity Sensor
- Full scale calibration, digital output
- Humidity Measurement Range: 20% to 9 0%RH (0-50 ° C temperature compensation)
- Temperature Measurement Range: 0 to +50 ° C
- Humidity Measurement Accuracy: Measurement Accuracy of ± 5.0% RH Temperature: ± 2 ° C
- Response time: <5 seconds
- Ultra Low Power Consumption
SKU: n/a - Modules, Power, Voltage Converters
DC-DC 5A Step Down Buck Converter XL4015
- Input voltage range:4~38VDC(Note:input voltage not exceeding 38V)
- Output voltage range:1.25-36VDC adjustable
- Output current: 0-5A, recommended for use in 4.5A.
- Output power: 75W
- Working temperature: -40~+85 degrees
- Operating frequency: 180KHz
- Efficiency:96%(max)
SKU: n/a - 2.4 Ghz, GSM, Modules, Sensors, Wireless
Mini GSM GPRS GPS Tracker Vehicle Bike Real Time Tracker
- Type: GPS Tracker
- Color: Black
- GMS Frequency: 900MHz/1800MHz or 850MHz/1900MHz
- GPRS: Class12,TCP/IP
- Voltage Range: DC 9-38V
- Standby Current: ≈0.2mA
- Power Consumption: 0.3w/h
- GPS Initialization: Cold Boot 38s (Open sky)
- Warm boot: 2s (Open sky)
- GPS Accuracy: 10m(2D RM)
- Working Temperature: -2℃ – +70℃
- Working Humidity: 20%-80%RH
SKU: n/a - 2.4 Ghz, Arduino, Arduino Components, Espressif, Modules, Wireless
ESP8266 07 Wifi Module
- Improve the peripheral circuit
- Enhanced impedance matching
- Signal output is better, whether it is stable or anti jamming ability
- IPEX Connector For External Antenna
- PCB antenna after professional laboratory testing, perfect matching, after ROHS certification, have been greatly improved!
- The enhanced version is fully compatible with the firmware before the ESP-12, based on the SPI and the new six IO port
- Development is more convenient, more widely used!
- Node MCU Compatible
- Arduino IDE Compatible
SKU: n/a - Arduino, Arduino Components, Display, Modules, Robotics
2002 20×2 Character LCD Display Module Blue Backlight
Arduino, Arduino Components, Display, Modules, Robotics2002 20×2 Character LCD Display Module Blue Backlight
- Interface: I2c
- I2C Address: 0x20
- Back lit (Blue with White Character Color)
- Fully Assembled and Tested Serial LCD 20×4 Module
- Display Format: 20 Characters x 4 lines
- Supply voltage: 5V
- The module can be easily interfaced with a MCU
- The module is a low-power consumption character LCD Module with a built-in controller
- Size: approx. 116x37X13mm
SKU: n/a - Raspberry Pi, Smart Boards
Raspberry Pi 3 Model B with Wifi & Bluetooth
- Broadcom BCM2837 chipset running at 1.2 GHz
- 64-bit quad-core ARM Cortex-A53
- 802.11 b/g/n Wireless LAN (Wifi)
- Bluetooth 4.1 (Classic & Low Energy)
- Dual core Videocore IV® Multimedia co-processor
- 1 GB LPDDR2 memory
- Supports all the latest ARM GNU/Linux distributions and Windows 10 IoT
- MicroUSB connector for 2.5 A power supply
- 1 x 10/100 Ethernet port
- 1 x HDMI video/audio connector
- 1 x RCA video/audio connector
- 4 x USB 2.0 ports
- 40 GPIO pins
- Chip antenna
- DSI display connector
- MicroSD card slot
- Dimensions: 85 x 56 x 17 mm
SKU: n/a - Power, Relays
2 Channel SSR G3MB-202P Solid State Relay Module
- 5V Omron solid state relay 240V 2A, output with resistive fuse 240V 2A
- Size: 25*34*21mm/0.98*1.35*0.82”
- Input Power: 5V DC (160mA)
- Input control signal voltage:
- (0-1.5V state low relay ON)
- (2.5-5V state high relay OFF)
- DC +: positive power supply (by relay voltage power supply)
- DC-: connect power negative
- CH: relay module signal to trigger the end (High level to trigger effective)
SKU: n/a - Programmers
USB Blaster ALTERA CPLD FPGA JTAG Programmer
- Support 1.5V,1.8V,2.5V,3.5V and 5.0V.
- Support all ALTERA products : CPLD ( MAX3000, MAX7000, MAX9000 and MAX II ) ; FPGA ( Stratix, StratixII, Cyclone, CycloneII, ACEX 1K, APEX20K and FLEX 10K )
- Active Serial Configuration Device (EPCS1, EPCS4, EPCS16)
- Support AS, PS and JTAG Program
- Rev. c
- USB 2.0
- Power & Activity LED
SKU: n/a - 2.4 Ghz, Wireless
2.4GHz Wifi & Wireless Directional Yagi Antenna 25Dbi
- This is a versatile high performance directional WiFi antenna.
- Easy installation, good looking.
- Color : Silver
- Cable length : 150 cm
- Bandwidth : 2400MHz (2.4Ghz)
- Maximum Power-W : 50
- Input impedance : 50 Ohms
- Bandwidth-MHz : 100
- Product size : 50 cm x 7cm x 3cm
- Gain : 25 dBi (Highly Directional beam at 23° x 26° angle)
- Vertical lobe width : 23°
- Horizon lobe width : 26°
SKU: n/a - Power, Voltage Converters
Electric Wall Panel Board Dual Socket Dual USB 2.1A Charger
- This USB Wall charging station provides two standard AC plug outlet and 2 USB outlets for charging Cell Phones, Tablets, and USB devices etc.
- Perfect for homes, offices and work places with a limited amount of wall sockets, as the device provides four separate electrical outlets to power or charge your gadgets.
- Perfect for use along bedside.
SKU: n/a - 5 Ghz, Modules, Wireless
RX5808 5.8G Wireless Audio Video Receiving Module
- Brand Name: Boscam
- Item Name: RX5808 Receiving Module
- Receiver Frequency: 5645-5945MHz; 8channels
- Receiving Sensitivity:-90dBm
- Frequency Control: built-in frequency and phase lock loop
- AV Output: analog AV signal output
- Power Supply voltage:3.5V
- Supply Current: 170mA
- Dimension: 28 x 23 x 3mm
SKU: n/a - Arduino, Arduino Components
51 MCU Minimum System Development Board
- Crystal 11.0592 Mhz
- Supported Microcontroller: STC89c52 STC12C5A60S2 STC11/10x series, AT89S52 & All other pins compatible MCUs.
- 5v Power in socket
- a power switch
- 2-way expansion pins of VCC & GND
- built in all parts, compact size full features.
- Board Size: 6.5cm x 3.1cm
SKU: n/a - 5 Ghz, Modules, Wireless
TS5828L 600mW Video Transmitter Module 5.8GHz for Quadcopter
TS5828L is the advanced and better version of TS5828, with better performance & high tx power it has longer range than ever before with 40 channels.
- Channel: 40 CH
- Frequency: 5.6G-5.9G
- Current: 190mA/12V
- Temp.: -10-85
- Transmitting power: 600mW
- Video Bandwidth: 8M
- Audio Bandwidth: 6.5M
- Antenna: RP-SMA
- Size: 38x18x8mm
- Weight: 7g
SKU: n/a - Modules, Power, Voltage Converters
LTC3780 DC-DC 10A Buck Boost Step UP Down
- The power supply is a kind of high-efficiency voltage automatically regulator.
- Whatever is the input voltage value,the output voltage can be maintained constant.
- For example,set the output to 12V, then the variation of the input voltage in the range of 5-32V,
- This module has a perfect protection function, and can be widely used in notebook power,
- vehicle power supply, solar charge etc..
SKU: n/a

DHT11 Temperature & Humidity Sensor
4 Ports High Speed USB 2.0 Hub


















