- ×
PAM8403 Digital Class D Audio Amplifier Board1 × ₨90 - ×
GY-291 ADXL345 Digital 3 Axis Digital Gravity Sensor1 × ₨400 - ×
RP920124 6Pin Relay 24v Coil 250V AC 8A1 × ₨600
Subtotal: ₨1,090
All Products
Showing 313–336 of 444 resultsSorted by popularity
- Arduino, Arduino Components, Input, Modules, Power, Relays
2 Channel 5v Optically Isolated Relay Module
Arduino, Arduino Components, Input, Modules, Power, Relays2 Channel 5v Optically Isolated Relay Module
- Operating Voltage: 5v DC
- Relay contact capacity: 250v AC 10A, or 30v DC 10A
- Optically Isolated from Mains
- Relay output: normally open, normally closed
- Low level Trigger
- signal input voltage range: 0-5 v
- VCC is power supply to board. JD – VCC is relay power supply (Default: JD – VCC and VCC Jumper)
- Compatible with Arduino, PIC, AVR etc
SKU: n/a - 2.4 Ghz, Arduino, Arduino Components, Modules, Wireless
SPP-C Bluetooth Module
- Bluetooth V2.1 + EDR
- Bluetooth Class 2
- Built-in PCB radio frequency antenna
- Support UART interface
- 3.3V power supply
- Status indication LED: P12
- Used to indicate the status of the Bluetooth module, LED flashing mode and Bluetooth module status corresponding to the following table:
- Mode LED Displays the module status
- (800 ms-on, 800 ms-off) waiting for pairing
- Host interrupt indication: P05
- Used to indicate whether the host is interrupted or not, the connection status is high, and other states are low.
SKU: n/a - Components, Connectors, Programmer Accessories, Wires and Cables
DB25 25 Pin Female 2 Rows Solder Type Parallel Cable Plug
Components, Connectors, Programmer Accessories, Wires and CablesDB25 25 Pin Female 2 Rows Solder Type Parallel Cable Plug
This is a standard 25Pin DB25 Female Connector Plug, Widely used in DB25 Type communications for example (DB25 Printer). It is solder type plug, you need to solder a wire & fix it in its case & tighten the screws to make a good quality communication cable of your own.
- Type: Solder Type
- Body Orientation: Straight
- Gender: Female
- Pins: 25 Pin
- Rows: 2 Rows 25 Pins
SKU: n/a - Components, Connectors, Programmer Accessories, Wires and Cables
DB25 25 Pin Male 2 Rows Solder Type Parallel Cable Plug
Components, Connectors, Programmer Accessories, Wires and CablesDB25 25 Pin Male 2 Rows Solder Type Parallel Cable Plug
This is a standard 25Pin DB25 Male Connector Plug, Widely used in DB25 Type communications for example (DB25 Printer). It is solder type plug, you need to solder a wire & fix it in its case & tighten the screws to make a good quality communication cable of your own. Good luck
- Type: Solder Type
- Body Orientation: Straight
- Gender: Male
- Pins: 25 Pin
- Rows: 2 Rows 25 Pins
SKU: n/a - Power, Voltage Converters, Wires and Cables
Male Plug Cigarette Lighter Socket Power Adapter with Fuse
Power, Voltage Converters, Wires and CablesMale Plug Cigarette Lighter Socket Power Adapter with Fuse
- Connector Type: Cigarette Lighter Plug (Car, Truck, SUV)
- Maximum Output Current: 5.0A
- Input Voltage: DC 12~35V
- 12v & 24v Power Supply According to Input
- To operate Router & Modems On The Go.
- Charge your Radio etc
SKU: n/a - Components, Connectors
High Speed 3D 4K HDMI Cable with Ethernet 1.5M
- 1080p Resolution. Audio Return Channel 3D – 3D is the latest rage for both home theater and gaming.
- Length 1.5 Meter (4.9 Feet)
- Deep Color – The Deep Color feature provides a minimum of 8-bits per color element (24-bits total), providing for a total of over 16 million color variations.
- High Definition Audio – HDMI supports a full range of high definition audio types, including SA-CD, DVD-Audio, DTS-HD Master Audio, and Dolby TrueHD.
SKU: n/a - Modules
USB External 3D Soundcard 3.5mm Mic & Headphones
- Plug & Play USB 2.0
- Supports 3D sound (Ac-3) Stereo 5.1-channel sound track, virtual speaker shifter
- Self-defining balanced mode
- Headphone & Microphone 3.5mm jack
- Compatible with: Digital devices which have an USB port
- Supported OS: Windows, Windows 98/2000/Me/XP, OS Mac 8.6 above
- Interface: USB 2.0
SKU: n/a - Components, IC
ICM7555 General Purpose CMOS Timer IC DIP8
- Exact equivalent in most cases for SE/NE 555/556 or TLC555/556
- Low supply current
- ICM7555: 60µA
- ICM7556: 120µA
- Extremely low input currents: 20pA
- High speed operation: 1MHz
- Guaranteed supply voltage range: 2V to 18V
- Temperature stability: 0.005%/°C at +25°C
SKU: n/a - Arduino, Arduino Components, Modules, Sensors
DS1302 RTC Real Time Clock Module
- DS1302 Real Time Clock Module
- Serial I/O interface for minimum pin count
- Wide Working Voltage: 2.0 ~ 5.5 V
- Single – byte and multi – byte transmission for clock or RAM data read/write
- TTL – compatible (Vcc) = 5 v
- Working Temperature: 0 to + 70 Deg C
- 32.768 KHz crystal oscillator
- Overall Size: Approx. 44 x 23 x 11 mm
SKU: n/a - Arduino, Arduino Components, Display, Modules, Robotics
2004 20×4 Character LCD Display Module
- Interface: I2c
- I2C Address: 0x20
- Back lit (Green with Black Character Color) (Blue with White Character Color)
- Fully Assembled and Tested Serial LCD 20×4 Module
- Display Format: 20 Characters x 4 lines
- Supply voltage: 5V
- The module can be easily interfaced with a MCU
- The module is a low-power consumption character LCD Module with a built-in controller
- Size: approx. 9.8cm x 6cm x 1.2cm
SKU: n/a - Programmer Accessories, Programmers
PLCC44 to DIP40 IC Adapter Socket Converter
Also Buy:
SOIC8 SOP8 to DIP8 Socket Adapter 200mil
SOIC8 SOP8 to DIP8 Socket Adapter 150mil
Compatible with:
- Mainly used to program bios PLCC-44
- Shipping Weight: 0.48 ounces
- Usage: First, put PLCC package on the adapter chip, pay attention to the bevel of the chip and PLCC seat bevel correspondence.
- Then insert the adapter into the cradle on the programmer.
- Applies To: This adapter is mainly used for PLCC package chip pins DIP dual in-line, in order to use with the programmer supporting the application of universal programmer!
SKU: n/a - Arduino, Arduino Boards, Development Boards, Modules
Arduino MEGA2560 With CH340G
- Microcontroller Atmega2560
- Serial Controller CH340 / Ch340G
- Operating Voltage 5V
- Input Voltage (recommended) 7-12V
- Input Voltage (limits) 6-20V
- Digital I/O Pins 54 (of which 15 provide PWM Output)
- Analog Input Pins 16
- DC Current per I/O Pin 40 mA
- DC Current for 3.3V Pin 50 mA
- Flash Memory 256 KB of which 8 KB used by Bootloader
- SRAM 8 KB
- EEPROM 4 KB
SKU: n/a
