Soldering Paste Flux Grease RMA-223 For SMD Repair ToolSubtotal: ₨250
All Products
Showing 289–312 of 444 resultsSorted by popularity
- Modules
MicroSD TF Card MP3 Player Audio Decoder
- Power range: 3.7~5.5V
- Superior sound quality
- Onboard 2W mono amplifier (power of up to 3W)
- recommendation 4Ω3W speakers
- 3.5mm gold plated headphone jack can connect with headphones or external audio.
- Power Up through USB cable to charge the MP3 battery, also can use 3.7V lithium battery, or Micro usb 5V power supply.
- Support TF Card(micro sd) and U disk play mode.
- No soldering with speaker terminals for easy wiring.
- The module is designed to facilitate modification.
- Product size: 45mm*36mm
SKU: n/a - Diagnostic Tools, Modules, Tools
USB OTG Endoscope Camera 3.5M for Android & PC
USB Endoscope Camera is new product featuring a high quality ultra compact size camera, look the hidden & very small places, It comes with the micro usb (extension is available for plugging into PC) Cnteral control unit have option to control the six led brightness for better imaging. Photo shooting & Video Recording both can be done. Water Proof & RoHS Compliant device.
SKU: n/a - Modules, Power, Voltage Converters
DC-DC Step Up Down Boost Buck Voltage Converter Module LM2577S LM2596S
Modules, Power, Voltage ConvertersDC-DC Step Up Down Boost Buck Voltage Converter Module LM2577S LM2596S
- Input Voltage :4-35V
- Output voltage: Continuously adjustable(1.25-25V unload adjust)
- Output current: 3A Max(If more than 15W, please install the heat sink)
- CC range :0-2A (adjustable)
- Revolving light current: CC value * (1%-100%), default is 0.1 times
- Minimum voltage difference: 2V
- Output power: Natural Cooling 15W
SKU: n/a - Arduino Components, Transistor
DS2401 Hard Coded Silicon Serial Number One Wire
- Model DS2401
- Protocol: 1 Wire
- Multiple Devices Support on Same Bus
- Protect Your Programming with Unique Serial Number.
- Extended 2.8V to 6.0V Range
- Unique, Factory-Lasered and Tested 64-Bit Registration Number (8-Bit Family Code + 48-Bit Serial Number + 8-Bit CRC Tester)
- Guaranteed No Two Parts Alike
SKU: n/a - Programmers
TL866II Plus EEPROM Flash BIOS USB Programmer 15000+ ICs
- Support simultaneously burn with 4 Programmers each computer
- The Minimum Volume and the lowest Power Consumption and Do not Feel any Heat in Process.
- All chips do not need external power supply, the low power consumption of its own to ensure that the USB port can provide enough power.
- Best internal 40 pin over voltage protection, the strongest VCC/VPP 4-level overcurrent protection. The short-circuit do not reset the PC.
- Wide range of chip 15000+ support, support for serial and parallel series 40/44/48PIN large capacity FLASH
- Unique serial ICSP interface. supporting the serial download and high-speed parallel high voltage programming. Note: TL866CS does not support ICSP
- Test CMOS4000 74/54 series integrated circuit. Can be located in the gate circuit error.
SKU: n/a - Components, Tools
Mini Electric Heat Sealing Machine for Plastic Bag
- Easy ,convenient to use and storage, great ideal for home use.
- A magnet on the base, It will stick on the Metal Surface.
- Size (L*W*H):10cm x 3.5cm x 4cm
- Material: ABS and metal
- Battery:1.5V , 2 AA Batteries (Not included!)
- Please open cover to preheat the item by pressing 5 seconds before using.
- You simply slids it along the edge of any bag and it’s sealed airtight
SKU: n/a - Programmer Accessories, Programmers
PLCC32 to DIP32 IC Adapter Socket Converter
Also Buy:
SOIC8 SOP8 to DIP8 Socket Adapter 200mil
SOIC8 SOP8 to DIP8 Socket Adapter 150mil
Compatible with:
- Mainly used to program bios PLCC-32
- Shipping Weight: 0.48 ounces
- Product Dimensions 5.7 x 4 x 1.1 inches
- Usage: First, put PLCC package on the adapter chip, pay attention to the bevel of the chip and PLCC seat bevel correspondence.
- Then insert the adapter into the cradle on the programmer.
- Applies To: This adapter is mainly used for PLCC package chip pins DIP dual in-line, in order to use with the programmer supporting the application of universal programmer!
SKU: n/a - Modules, Power, Voltage Converters
AT30 Buck Boost Voltage Converter Module
- Input voltage: 4-30V
- Output voltage: 0.5-30V
- Output current: 3A, 4A with cooling fan
- Output power: 30W without cooling fan,60W with cooling fan
- Output ripple: 30MV (Full output voltage)
- Conversion efficiency: Boost, 88%-91%; Buck,87%-90%.
- Short circuit protection: Yes
- Working frequency: 180KHz
- Size: 48*23*21mm
SKU: n/a - Power, Relays
8 Channel 5v Optically Isolated Relay Module
- 8 Channel Relay Module
- Operating Voltage: 5v DC
- Relay contact capacity: 250v AC 10A, or 30v DC 10A
- Optically Isolated from Mains
- Relay output: normally open, normally closed
- Low level Trigger
- signal input voltage range: 0 – 5 v
- Compatible with Arduino, PIC, AVR etc
SKU: n/a - Orange Pi, Smart Boards
Orange Pi Zero H2+ Quad Core 512MB DDR3
- CPU: H2 Quad-Core Cortex-A7 H.265/HEVC 1080P
- GPU: Mali400MP2 GPU @600MHz, Supports OpenGL ES 2.0
- Memory: 512MB DDR3
- Onboard NIC: 100M/10M Ethernet RJ45
- Onboard Wifi: XR819, IEEE802.11 b/g/n
- Onboard Storage: Class 10 TF Card Slot, SPI Flash (Optional)
- Power: Micro USB
- USB 2.0: One USB 2.0 Host, One OTG 2.0 Host
- Low-level Peripherals: 26 Pins Header, Compatible with Raspberry Pi B+
- 13 Pins Header, with 2x USB, IR pin, Audio (MIC, AV)
- Supported OS: Android, Ubuntu, Debian, Armbian, OpenWRT etc
SKU: n/a - Display, Input, Smart Boards
HDMI to VGA Converter With Audio Support
- Interface: HDMI Input, VGA Output.
- Audio Out Support
- Compliant with HDMI 1.3 standard.
- Convert the video signal from digital to analog.
- Upgrade Version, integrated with Audio output.
- Powered by HDMI, no external power adapter required.
- Plug and Play, no software is needed.
- Easy to use: install in seconds, no need of setting.
- Conversion: it can convert complete HDMI into VGA video.
- Compatible for PC / Laptop / DVD / Sky HD / for Apple TV and other HD device to be connected with VGA monitor / projector or other display.
- Color: Black,White
- Size:48/22*14mm
- Weight: 22 g
SKU: n/a - Arduino, Arduino Components, Input, Modules, Power, Relays
2 Channel 5v Optically Isolated Relay Module
Arduino, Arduino Components, Input, Modules, Power, Relays2 Channel 5v Optically Isolated Relay Module
- Operating Voltage: 5v DC
- Relay contact capacity: 250v AC 10A, or 30v DC 10A
- Optically Isolated from Mains
- Relay output: normally open, normally closed
- Low level Trigger
- signal input voltage range: 0-5 v
- VCC is power supply to board. JD – VCC is relay power supply (Default: JD – VCC and VCC Jumper)
- Compatible with Arduino, PIC, AVR etc
SKU: n/a - 2.4 Ghz, Arduino, Arduino Components, Modules, Wireless
SPP-C Bluetooth Module
- Bluetooth V2.1 + EDR
- Bluetooth Class 2
- Built-in PCB radio frequency antenna
- Support UART interface
- 3.3V power supply
- Status indication LED: P12
- Used to indicate the status of the Bluetooth module, LED flashing mode and Bluetooth module status corresponding to the following table:
- Mode LED Displays the module status
- (800 ms-on, 800 ms-off) waiting for pairing
- Host interrupt indication: P05
- Used to indicate whether the host is interrupted or not, the connection status is high, and other states are low.
SKU: n/a
