DS3231 RTC Real Time Clock ModuleSubtotal: ₨350
All Products
Showing 217–240 of 444 resultsSorted by popularity
- 2.4 Ghz, Bluetooth, Modules, Wireless
Universal Bluetooth Audio Receiver Kit for Sound System & Car
- Bluetooth Version: 4.1
- Frequency Range : 2.4GHz
- Profile: A2DP
- Transmission Range: Up to 10m / 33ft
- I/O 3.5mm female plug, Micro USB female port
- Power Supply: DC 5V (Micro USB)
- Charge Time: About 30 min
- Working Time: About 4h
SKU: n/a - Arduino Components, Modules, Power, Tools
Digital Panel Voltmeter 0.36 LED Display 2.5-30V DC
- Type : 0.36 two-wire DC voltmeter
- Material: Plastic
- Size: 3.5 x 1.5 x 1cm
- Color: Black
- Display Color: Red
- Two-wire Measurement range: DC 2.5~32V
- Working Current:< 23mA
- Working Temperature: -10C-65C
- Minimum input voltage: DC 2.5V
- Maxmum input voltage: DC 32V
SKU: n/a - Soldering, Tools
SUOER SE-930 Soldering Iron 30W
- Soldering iron 220V.
- High efficiency, fast start.
- Soldering temperature very stably.
- CE, CTA, RoHS approved.
- Good material ensure product safety and long life.
- Model Number: SE-930
- Input Voltage: 220-240V
- Output Temperature: 100°C~400°C
- Temperature Stability: Good
- Output Power: 30W
SKU: n/a - Modules, Power, Relays
XH-M604 Charge Controller Protection Module With LED Display
XH-M604 is a Charging Control Module 12-24V with Protection from Overcharging
- XH-M604 is ideal solution for Solar Panel & Battery
- Connect your Solar Panel or Charger on In+ & In-
- Connect Battery on BAT+ & BAT- (Lithium or Lead Acid)
- This Module protects your battery from Overcharging & Overheating
- It will extend the life of your battery
- Input Voltage:DC 6-60V
- Current: 30A
- Display Accuracy:0.1V
- Control Accuracy:0.1V
- Output Type:direct output
- Voltage Tolerance:±0.1V
- Apply For:6-60V MAX 80V battery
- Dimension:81*54*18mm
SKU: n/a - Power, Voltage Converters
250W High Power Step-Up CC/CV Module
- DIY a power supply, for example 12V can input and output can 12-50V adjustable.
- The power supply for your electronic device , according to your system can set the output voltage value .
- As car power supply for your laptop , PDA or a variety of digital products supply.
- DIY a mobile notebook power supply: 12V coupled with high-capacity lithium battery pack , so you can go where light where books
- Solar panel regulator .
- To the battery , rechargeable lithium batteries .
- Driving high-power LED lights.
SKU: n/a - Programmers
PIC K150 ICSP Programmer
- K150 is a low-cost high-performance PIC programmer
- Support most popular PIC chips, programmed, read out, encryption
- Use a high-speed USB communication,
- Fast programming
- The programming quality is stable and reliable.
- (Speedaverage 3-5 times PICSTART +)
- fully automatic programming checksum
- equipped with 40pin DIP programming Block
- Direct programming of 8pin-40pin DIP chip; 8pin-40 pin chip other than through the onboard the ICSP interface online downloadsoftware
- software-compatible the Windows98 and Windows2000/NT, Windows XP/windows7,8,10 operating system
- New device with the PIC escalating. Master chip retains DIP package with seat!
SKU: n/a - Arduino, Arduino Components, RFID, Wireless
125Khz RFID Tag Keychain
- Big coil, ABS material
- Strong magnetic induction
- 100% brand new and high quality
- Operation frequency: 125Khz
- Each token pre-programmed with unique ID which is printed on it
- Each comes with Key ring included
- Compatible with all RFID reader to gain access
- Card read distance: 0-10 centimetres
- Water resistant
SKU: n/a - Arduino, Arduino Components, Modules
Openlog Serial to Micro SD Data Logger Module
Log & Store Serial Interface data to MicroSD card of upto 64GB, Compatible with all Microcontrollers & Serial capable devices.
- VCC Input: 3.3V-12V (Recommended 3.3V-5V)
- Log to low-cost microSD FAT16/32 cards up to 64GB
- Simple command interface
- Configurable baud rates (up to 115200bps)
- Preprogrammed ATmega328 and bootloader
- Four SPI pogo pins
- Two LEDs indicate writing status
- 2mA idle, 6mA at maximum recording rate
- can run at least the connection for vcc, gnd, rx
SKU: n/a - 2.4 Ghz, Banana Pi, Orange Pi, Raspberry Pi, Wireless
Air Mouse 2.4G Mini Rechargeable Wireless Keyboard C120
2.4 Ghz, Banana Pi, Orange Pi, Raspberry Pi, WirelessAir Mouse 2.4G Mini Rechargeable Wireless Keyboard C120
This product is a remote controller with the multi-function of Air Mouse, Keyboard, Multimedia Android Control and Somatic games support. Compatible with almost all devices.
- Keyboard & Mouse Functionality
- RF 2.4 GHz wireless communication.
- Working Distance: 10m
- Frequency Range: 2400~2483 GHz.
- Working current < < 20 mA
- Sleep current < < 20 uA
- Rechargeable lithium battery.
- Indication: 1 LED indicator
SKU: n/a - Arduino, Arduino Components, Arduino Shields, Modules
A4988 3D Printer Stepper Motor Driver Module
- Crossover-current protection
- Thermal shutdown circuitry
- 3.3 and 5 V compatible logic supply
- Thermal shutdown circuitry
- Ground Fault Circuit
- Load short-circuit protection
- Of five optional step mode: full, 1/2, 1/4, 1/8 and 1/16
SKU: n/a - 433 Mhz, Modules, Wireless
NRF905 Wireless Transceiver Module 433 868 915 MHz
- NRF905 work band: 433/868/915MHz
- Channel number: 170
- Function: transmitter / receiver
- Frequency stabilization method: PLL
- Modulation mode: the FSK / GMSK
- Maximum output power: +10 dBm
- Sensitivity:-100dBm
- Maximum operating rate: 76.8Kbit / s
- Working voltage :2.7 – 3.3V
SKU: n/a - 433 Mhz, Arduino, Arduino Components, Modules, Wireless
SI4432 433mhz Wireless Transceiver Module
- Operating Frequency: 240Mhz – 930Mhz (customizable)
- Operating Voltage: 1.8V to 3.6V
- Current – Sleep mode : 1.0uA
- Current – Standby mode : 800nA
- Current – Receive mode : 18.5mA
- Current – Transmit mode @ +20dBm : 85mA
- Opeting Temperature: -20C to +70C
- Data rate – Maximum : 256kbps
- Transmit power : +20 dBm (Max)
- Receiver Sensetivity : -121dBm
- Range : upto 1.5km (depends upon several other parameters, hence not gauranteed)
- Module Header pin pitch: 0.05inch / 1.27mm
SKU: n/a - Arduino, Arduino Components, Modules, Sensors
SW520D Tilt Sensor Module Module
- Using high-sensitivity switch SW 520D as the sensor.
- The module is equipped with fixed bolt hole for convenient installation.
- Using LM393 wide voltage comparator,clean signal,good waveform,strong driving ability with output of more than 15 mA.
- The working voltage of 3.3V to 5V.
- Small PCB size:3.2cm x 1.4cm.
- Digital output form: digital switch output (0 and 1).
SKU: n/a
