250W High Power Step-Up CC/CV Module

CD-250W High Power Step-Up CC/CV Module Price in Pakistan

• 250W boost constant current module
• Step-up module (BOOST)
• Input voltage : DC8.5V-48V
• Input current : 10A (MAX) exceeds 8A please enhance heat dissipation
• Quiescent current : 10mA (12V liter 20V , the output voltage , the higher the current will increase too quiet )
• Output voltage : 10-50V continuously adjustable (The default output 19v)
• 12-80V fixed output ( for volume customers )
• [Output current ] : 10A MAX exceed 6A please enhance heat dissipation ( input, output pressure related to the pressure the greater the output current is smaller )
• [ Constant ] range : 0.2-8A
• [ Output ]: = input voltage * 10A, such as: input 12V * 5A = 60W, input 24V * 5A = 120W,
• Input 36V * 5A = 180W, Input 48V * 5A = 240W,
• For more power , the two modules can be used in parallel, such as the output to be 10A, two modules can be used in parallel ,
• The current per module can be transferred to 5A .
• [ Temperature ]: -40 to + 85 degrees ( ambient temperature is too high , please enhance heat dissipation )
• [ Operating frequency ] : 150KHz
• [ ] Conversion efficiency : up to 96% ( efficiency and input and output voltage, current , pressure -related )
• [ Overcurrent protection ]: Yes ( input exceeds 13A, automatically reduces the output voltage , have a range of error . )
• [ Input reverse polarity protection ]: Yes, ( less than 5A as the need for more in the reverse current in the input string into the diode )
• [Installation method: 4Pcs 3mm screw holes
• Connection method : Connection Output
• [ Module size ] : Length 70mm width 36mm height 13mm
• [ Single ] module : 50 g
• An output voltage / current regulation method :
• 1 , adjust potentiometer RV1 , according to your battery or LED, the output voltage is set to the voltage value you need . 10 LED string voltage regulator such as 37V.
• 2 , clockwise adjustment potentiometer RV2 about 30 laps , the output current is set to a minimum , connected LED, adjust potentiometer RV2 to the desired current. After charging for battery , the battery fully discharged , and then to output , adjust to your desired current RV2 , ( be sure to use for charging batteries completely discharged before being allowed to transfer , because the battery power is left in the more , the charge current is smaller. )Please do not use the short-circuit current transfer mode , the circuit structure of the booster module can not be adjusted by way of a short circuit .

Applications

• DIY a power supply, for example 12V can input and output can 12-50V adjustable.
• The power supply for your electronic device , according to your system can set the output voltage value .
• As car power supply for your laptop , PDA or a variety of digital products supply.
• DIY a mobile notebook power supply: 12V coupled with high-capacity lithium battery pack , so you can go where light where books
• Solar panel regulator .
• To the battery , rechargeable lithium batteries .
• Driving high-power LED lights.

 Package Includes

• 1 x 250W high power step-up CC/CV Module